Datasheet4U Logo Datasheet4U.com

PFS712EG - (PFS704 - PFS729) High Power PFC Controller

Download the PFS712EG datasheet PDF. This datasheet also covers the PFS704 variant, as both devices belong to the same (pfs704 - pfs729) high power pfc controller family and are provided as variant models within a single manufacturer datasheet.

Description

3 Product Highlights 3 Pin Functional Description 4 Pin Configuration 4 Functional Block Diagram 4 Functional Description 5 Output Power Table 9 Application Example10-11 Design, Assembly, and Layout Considerations 12 Absolute Maximum Ratings 19 Parameter Table19-25 Typical Performance C

Features

  • include: UV, OV, OTP, brown-in/out, cycleby-cycle current limit, and power limiting for overload protection.
  • Halogen free and RoHS compliant.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (PFS704_PowerIntegrations.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
PFS10L45 MOS Schottky Rectifier PFC Device
PFS10L60 MOS Schottky Rectifier PFC Device
PFS122 8bit MTP Type MCU PADAUK
PFS154 8bit MTP Type IO controller PADAUK
PFS15L45 MOS Schottky Rectifier PFC Device

Other Datasheets by Power Integrations

Part Number Description
PFS710EG High Power PFC Controller
PFS714EG (PFS704 - PFS729) High Power PFC Controller
PFS716EG (PFS704 - PFS729) High Power PFC Controller
PFS704 High Power PFC Controller
PFS704EG High Power PFC Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PFS704-729EG HiperPFS Family ™ High Power PFC Controller with Integrated High-Voltage MOSFET Key Benefits • Single chip solution for boost power factor correction (PFC) • EN61000-3-2 Class C and D compliant • High light load efficiency at 10% and 20% load • >95% efficiency from 10% load to full load • <130 mW no-load consumption at 230 VAC with output in regulation • <50 mW no-load consumption at 230 VAC in remote off state • Frequency adjusted over line voltage, and line cycle • Spread-spectrum across >60 kHz window to simplify EMI filtering requirements • Lower boost inductance • Provides up to 1 kW peak output power • >1 kW peak power delivery in power limit voltage regulation mode • High integration allows smaller form factor, higher power density designs • Incorporates c
Published: |