LES015ZJ Datasheet | Power-One

LES SERIES - 15 WATT DESCRIPTION LES DC/DC converters provide up to 15 Watts of output power in an industry standard package and footprint. With a maximum case temperature of 100°C, the LES is well suited for the most demanding tele, networking, and industrial applications. The LES Features 1500 VDC isolation, short circuit, and overtemperature protection, as well as six-sided shielding. The LES is available with optional enable and voltage trim pins. Please see the IAD Series for dual output applications. Features - - - - Industry Standard Package Industry Standard Pinout 85°C Case Operation Short Circuit Protection - 24V and 48V Inputs - Input Pi Filter and 6-Sided Shielding - Regulated Outputs - 1500V Isolation Efficiency vs. Load (24V Input) 85 80 75 EFFICIENCY % 70 65 60 55 50 45 LES010YE-A EFF. (18v) EFF. (24v) EFF. (36v) TECHNICAL SPECIFICATIONS Input Voltage Range 24 VDC Nominal 48 VDC Nominal Reflected Ripple Output Setpoint Accuracy Line Regulation Vin Min. - Vin Max., Iout Rated Load Regulation Iout Min. - Iout Max., Vin Nom. Minimum Output Current Dynamic Regulation, Loadstep Pk Deviation Settling Time Voltage Trim Range Short Circuit / Overcurrent Protection Current Limit Threshold Range, % of Iout Rated Short Circuit Current Max. (12Vout & 15Vout : 4.0A when Vout= 0.25V) OVP Trip Range OVP Type Notes † MTBF predictions may vary slightly from model to model. Specifications typically at 25°C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260°C, ten seconds; fully patible with mercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information. Units are water-washable and fully patible with mercial spray or immersion post wave-solder washing equipment. - 36 VDC 36 - 75 VDC 50 m A 85 80 75 LOAD % Efficiency vs. Load (48V Input) ±1% 0.2% Vout 0.5% Vout 10% Iout Rated 25% Iout...