DFC15U48S12
Description
The DFC15 Series of DC/DC converters are designed to provide a wide range of PCB power solutions. The converter features dual output filters for low noise.
Key Features
- Up to 15 Watts Output Power
- Efficiencies to 83%
- Very Low OFF Current
- 700V Isolation
- Dual Stage Output filter
- -40°C to +90°C Operation
- Ultra-Wide Range Input (3:1)
- Remote ON/OFF and TRIM General Specifications (1) All Models ON/OFF Function (2) OFF Logic Level or Pin Open OFF Logic Level Input Resistance Converter Idle Current ON/OFF Pin Low Isolation (3) Isolation Voltage Input to Output 10 µA Leakage Input to Output Capacitance Output Trim Function Input Resistance Open Circuit Voltage Environmental Case Operating Range, Tc No Derating Storage Range Thermal Impedance (5) General MTBF (Calculated) Unit Weight Chassis Mounting Kit NOTES (1) All parameters measured at Tc = 25°C, nominal input voltage and full rated load unless otherwise noted. Refer to the Technical Reference Section for the definition of terms, measurement circuits and other information. The ON/OFF pin is the Open Collector TTL, CMOS, and relay compatible. The input to this pin is referenced to Pin 2 (-Input) and is protected to +75VDC. The Case is tied to Pin 3, +Input pin. The case thermal impedance is specified as the case temperature rise over ambient per package watt dissipated.
