Datasheet4U Logo Datasheet4U.com

PT4219 - Primary Side Offline LED Controller

Description

The PT4219 is a primary side constant current controller which can achieve high power factor in a single stage converter, targeted to applications in solid state lighting.

It is designed for the flyback topology, and regulates output current accurately without the secondary feedback loop.

Features

  • Constant Current Control Without Secondary Feed back Accurate Constant Current Output Quasi-Resonant Mode Operation Ultra-low（10uA）Start Up Current Low Quiescent Current (1mA) VCC Under Voltage Protection Over Voltage Protection by Voltage Holding Cycle by Cycle Current Limit Rcs Open Circuit Protection Transformer Winding Short Circuit Protection Output Open/Short Circuit Protection Over Temperature Protection.

📥 Download Datasheet

Datasheet Details

Part number PT4219
Manufacturer PowTech
File Size 315.69 KB
Description Primary Side Offline LED Controller
Datasheet download datasheet PT4219 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PT42C 4-Bit Programmable Delay Line Kappa Networks
PT4102 Step-up White LED Driver Micro Bridge Technology
PT4110 Side View and Thin Flat Type Phototransistors Sharp Electrionic Components
PT4110F Side View and Thin Flat Type Phototransistors Sharp Electrionic Components
PT4115 30V / 1.2A high dimming ratio LED constant current driver UMW

Other Datasheets by PowTech

Part Number Description
PT4211 30V/350mA High-Brightness LED Driver
PT4212 Non-isolated single-stage active PFC LED driver chip
PT4213 Primary Side CC Controller
PT4201 Current-mode PWM Controller
PT4203 Primary Side CC Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PT4219 Primary Side Offline LED Controller with Active PFC GENERAL DESCRIPTION The PT4219 is a primary side constant current controller which can achieve high power factor in a single stage converter, targeted to applications in solid state lighting. It is designed for the flyback topology, and regulates output current accurately without the secondary feedback loop. PT4219 works in quasi-resonant mode to reduce the MOSFET switching loss. The device uses extremely low startup and low quiescent current to achieve high efficiency.
Published: |