900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Picker

PCS33 Datasheet Preview

PCS33 Datasheet

Solid State Relay

No Preview Available !

 
Solid State Relay
PCS33
OUTPUT PARAMETERS (Ta = 25°C)
Load Voltage Option
D30
D50
FEATURES
 Load Current: 7 to 100 A, MOSFET Output
 Load Output Range: 0—500 VDC
 DC Input: 3-32 VDC
 Panel Mount
 Dielectric Strength of 2,500 VAC
 RoHS Compliant
D100 D150 D200 D400
D500
Load Current Option
50 100 40 80 20 40
80
50
10 40
10
7 12
Load Voltage Range
0 - 30 VDC
0 - 50 VDC
0 - 100 VDC
0 - 150 VDC 0 - 200 VDC 0 - 400 VDC 0 - 500 VDC
Max. Load Current
Min. Load Current 0.02 A
50 A 100 A 40 A 80 A 20 A 40 A 80 A
50 A
10 A 40 A
10 A
7 A 12 A
Max. Off-State Leakage
Current
0.1 mA
0.1 mA
0.1 mA
0.1 mA
0.1 mA
0.1 mA
0.1 mA
Max. On-State Voltage Drop 0.35 V 0.35 V 0.64 V 0.64 V 1.5 V 1.5 V 1.6 V 0.6 V
1V 1V
2.4 V 1.9 V 1.5 V
Max. On-State Resistance 7 m3.5 m16 m8 m75 m37.5 m20 m12 m105 m35 m0.24 m0.26 m0.125 m
Max. Turn-On Time
1 ms
Max. Turn-Off Time
0.5 ms
Max. Surge Current (10 ms) 120 Apk 240 Apk 100 Apk 200 Apk 80 Apk 160 Apk 240 Apk 200 Apk
40 Apk 130 Apk
40 Apk
30 Apk 40 Apk
INPUT PARAMETERS (Ta = 25°C)
Control Voltage Range
Must Operate Voltage
Must Relaeas Voltage
Max. Input Current
Must Reverse Voltage
3 - 32 VDC Without Led
4 - 32 VDC With LED
3 VDC Without LED
4 VDC With LED
1.0 VDC
28 mA at 32 VDC
-32 VDC
CHARACTERISTICS
Dielectric Strength  
Insulation Resistance 
Vibration Resistance
Shock Resistance
Operating Temperture
Storage Temperature
Weight
2500 VAC, 50 Hz/60 Hz, 1 min.
(Input, Output to Output)
1000 Mat 500 VDC
10 Hz - 55 Hz 1.5 mm DA
980 m/s2
- 30°C to 80°C
- 30°C to 100°C
Approximately 100 g
ORDERING INFORMATION
Example:
PCS33
-D 100
Model: PCS33
Control Voltage: D: 3 - 32 VDC Without LED,
4 - 32 VDC With LED
Load Voltage: 30: 30 VDC; 50: 50 VDC; 100: 100 VDC;
150: 150 VDC; 200: 200 VDC; 400: 400 VDC; 500; 500 VDC
Load Current: 7: 7 A; 10: 10 A; 12: 12 A; 20: 20 A
40: 40 A; 50: 50 A: 80: 80 A; 100: 100 A
Status LED: Nil: Not Included; L: Indicator LED
Box Quantity: 100; Inner Box 2
-10
OPTIONS (Load Current - A / Load Voltage - V)
L A/V 30 50 100 150 200 400 500
7 XX
10 X X
12 X
20 X
40 X X
X
50 X
X
80 X
X
100 X
3220 Commander Drive, Suite 102 Carrollton, TX 75006
Sales: (972) 713-6272
(888) 997-3933
Fax: (972)735-0964
www.PickerComponents.com
e-mail: sales@pickercomponents.com
Dimensions are listed for reference purposes only.
PCS33 Rev A 8/5/15
Specifications and Availability subject to change without notice.
1 of 3




Picker

PCS33 Datasheet Preview

PCS33 Datasheet

Solid State Relay

No Preview Available !

 
PCS33
PCS33
PRECAUTIONS
1. A diode is required for Inductive Loads.
2. When choosing a SSR, note the actual load current and ambient temperature and reference the Characteristic Curves below.
3. SSR require a adequate heat sinking or other effective cooling measures.
4. With ambient temperature above 250C refer to the curve of Max. Load Current vs Ambient Temperature for load current derating.
5. Apply heat-conducting silicon grease or a thermal transfer pad on the space between SSR and heat sink and screw the SCR firmly in to the heat sink to
avoid damage from overheating.
6. Tighten the SSR terminal screws properly. We recommended screw installation torque as follows:
M4 screw mounting torque range is (0.98-1.37)N • m,
M3 screw mounting torque range is (0.56-0.98)N • m.
7. Lose screws will damage the SSR with heat generated from connections. Also, excessive screw torque may damage relays internal components.
8. It’s recommended to use a heat sink matched to the Current Load. With any heat sink test that the SSR base temperature does not exceed 65"C.
9. Listed parameters are based on resistive loads. Do not use the relay beyond the described current, temperature, load or voltage limits as described in this
data sheet.
DIMENSIONS (mm)
CHARACTERISTIC CURVES
( D200-10)
Wit h   a  PCH-I-50 Heat Sink
(D  100-40,D200-40)
With a PCH-H-150 Heat Sink
Fan Air Volume 20 CFM
 (D50-80)
With a PCH-H-150 Heat
3220 Commander Drive, Suite 102 Carrollton, TX 75006
Sales: (972) 713-6272
(888) 997-3933
Fax: (972)735-0964
www.PickerComponents.com
e-mail: sales@pickercomponents.com
Dimensions are listed for reference purposes only.
PCS33 Rev A 8/5/15
Specifications and Availability subject to change without notice.
2 of 3


Part Number PCS33
Description Solid State Relay
Maker Picker
PDF Download

PCS33 Datasheet PDF






Similar Datasheet

1 PCS3040R HIGH POEWR TERMINATORS
RHOPOINT COMPONENTS
2 PCS3042P HIGH POEWR TERMINATORS
RHOPOINT COMPONENTS
3 PCS3042S HIGH POEWR TERMINATORS
RHOPOINT COMPONENTS
4 PCS3042W HIGH POEWR TERMINATORS
RHOPOINT COMPONENTS
5 PCS3060P HIGH POEWR TERMINATORS
RHOPOINT COMPONENTS
6 PCS3080P HIGH POEWR TERMINATORS
RHOPOINT COMPONENTS
7 PCS32 Solid State Relay
Picker
8 PCS3216 High Power Thin Film Chip Terminator
SUSUMU
9 PCS33 Solid State Relay
Picker





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy