900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Picker

PCS20 Datasheet Preview

PCS20 Datasheet

Solid State Relay

No Preview Available !

 
1.5 Amp Solid State Relay
PCS20
E93379
INPUT PARAMETERS (Ta = 25°C)
5 4 - 6 VDC
Control Voltage Range
12
9.6 - 14.4 VDC
24 19.2 - 28.8 VDC
5 4 VDC
Must Operate Voltage
12
9.6 VDC
24 1.0 VDC
Must Release Voltage
1.0 VDC
Maximum Input Current
20 mA
5 270 Ω 
Input Resistance
12
750 Ω 
24 1,640 Ω 
CHARACTERISTICS
Dielectric Strength (Input to Output)
Insulation Resistance
Vibration Resistance
Shock Resistance
2,000 VAC, 50 Hz/60 Hz, 1 min
1,000 Mat 500 VDC
10 Hz to 55 Hz 1.5 mm DA
980 m/s2
FEATURES
 Load Current 1.2 or 1.5 Amp
 Load Output Range 48-280VAC
 DC Input: 5 V, 12 V or 24 V
 SIL Printed Circuit Board Mount
 2,000 VAC Opto-Isolation Between Input and Output
 Zero-Cross or Random Turn-On
 Optional RC Snubber
 RoHS Compliant
OUTPUT PARAMETERS (Ta = 25°C)
Load Voltage Range
48 VAC to 280 VAC
Load Current Range
0.1 A to 1.5 A
Max. Surge Current (10ms)
25 Apk
Max. Leakage Current
1.5 mA
Max. On-State Voltage Drop
1.5 Vrms
Max. Turn-On Time
Zero Cross
Random
1/2 Cycle + 1 ms
1 ms
Max. Turn-Off Time
1/2 Cycle + 1 ms
Max. Transient Overvoltage
600 Vpk
Off-State dv/dt
200 V/us
Max Zero-Cross Overvoltage
± 15 V
Min. Power Factor
0.5
Max. I2t for Fusing (10 ms)
3.1 A2 s
Operating Temperature
Storage Temperature
Ambient Humidity
Weight
- 30°C to 80°C
- 30°C to 100°C
45% to 85% RH
3.5 g
ORDERING INFORMATION
Example:  PCS20  ‐12D  ‐240A  ‐2  Z  T  ‐241 
 Model:  PCS20
                    
 Control Voltage:  5D: 5 VDC, 12D: 12 VDC, 24D: 24 VDC                
 Load  Voltage:  240A: 240VAC 
              
Load Current: 1.2: 1.2 Amp, 1.5: 1.5 Amp 
              
 Switching Type:  Z: Zero Crossing, R:  Random TurnOn                
 RC Snubber: Nil: Without RC Snubber, S*: With RC Snubber             
 Pin Spacing:  Nil: 331mm, 241: 241mm 
           
 Note: PCS20 with Snubber is not UL Recognized 
     
Box Quan ty: 5,000; Inner Box: 50 
3220 Commander Drive, Suite 102 Carrollton, TX 75006
Sales: (972) 713-6272
(888) 997-3933
Fax: (972)735-0964
www.PickerComponents.com
e-mail: sales@pickercomponents.com
Dimensions are listed for reference purposes only.
PCS20 Rev A 8/4/15
Specifications and Availability subject to change without notice.
1 of 2




Picker

PCS20 Datasheet Preview

PCS20 Datasheet

Solid State Relay

No Preview Available !

 
PCS20
PCS20
PRECAUTIONS
1. Maximum Soldering Temperatures: 260°C for a maximum of 10 seconds or 350°C for a maximum of 5 seconds.
2. The SSR case serves to dissipate heat. Install the relays so that they are adequately ventilated. If poor ventilation is unavoidable, the load current must be
reduced. Please refer to the curve of "Max. Load current Vs. Ambient Temperature".
3. The input circuitry does not incorporate a circuit protecting the SSR from being damaged due to a reversed connection. Make sure that the polarity and the
input and output are correct when connecting.
4. If the output transient voltage exceeds the nominal value a varistor should be mounted on the SSR output terminals in parallel to prevent a breakdown of
the triac output junction. The result could be a permanent short of the output. The recommended varistor voltage 470V.
5. When using the relay in phase control applications, at a phase control angle close to 180 degrees the relay's input signal will turn off at the trailing edge of
the AC sine wave. The phase delay must be limited to end 200us before AC zero cross. This assures that the relay has time to switch off. Shorter times
may cause loss of control at the following half cycle.
6.  Please do not use the relay beyond the descriptions in the Data Sheet.
DIMENSIONS (mm/inches)
7. Terminal Arrangement 
( 241):
CHARACTERISTIC CURVES
3220 Commander Drive, Suite 102 Carrollton, TX 75006
Sales: (972) 713-6272
(888) 997-3933
Fax: (972)735-0964
www.PickerComponents.com
e-mail: sales@pickercomponents.com
Dimensions are listed for reference purposes only.
PCS20 Rev A 8/4/15
Specifications and Availability subject to change without notice.
2 of 2


Part Number PCS20
Description Solid State Relay
Maker Picker
PDF Download

PCS20 Datasheet PDF






Similar Datasheet

1 PCS20 Solid State Relay
Picker
2 PCS2012 High Power Thin Film Chip Terminator
SUSUMU
3 PCS27 Solid State Relay
Picker
4 PCS28 Dual Solid State Relay
Picker
5 PCS2D09 Power Chip Shielded Inductors
Allied Components International
6 PCS2D11 Power Chip Shielded Inductors
Allied Components International
7 PCS2D14 Power Chip Shielded Inductors
Allied Components International
8 PCS2P2309NZ 3.3V 1:9 Clock Buffer
ON Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy