TDA8577 Datasheet Dual Common-mode Rejection Differential Line Receiver

Manufacturer: Philips Semiconductors (now NXP Semiconductors)

Overview: INTEGRATED CIRCUITS DATA SHEET TDA8577 Dual common-mode rejection differential line receiver Preliminary speciﬁcation File under Integrated Circuits, IC01 September 1995 Philips Semiconductors Philips.

Datasheet Details

Part number	TDA8577
Manufacturer	Philips Semiconductors (now NXP Semiconductors)
File Size	73.01 KB
Description	Dual common-mode rejection differential line receiver
Datasheet	TDA8577-Philips.pdf

General Description

The TDA8577 is a two channel differential amplifier with 0 dB gain and low distortion.

The device has been primarily developed for car radio applications where long connections between signal sources and amplifiers (or boosters) are necessary and where ground noise has to be eliminated.

The device is intended to be used to receive line inputs in audio applications that require a high level of common-mode rejection.

Key Features

Excellent common-mode rejection, up to high frequencies.
Elimination of source resistance dependency in the common-mode rejection.
Few external components.
High supply voltage ripple rejection.
Low noise.
Low distortion.
All pins protected against electrostatic discharge.
AC and DC short-circuit safe to ground and VCC.
Fast DC settling.

TDA8577 Distributor

More Datasheets from Philips Semiconductors (now NXP Semiconductors)

Part Number	Description
TDA8559T	Low-voltage stereo headphone amplifier
TDA8588AJ	Power Amplifier and Multiple Voltage Regulator
TDA8588BJ	Power Amplifier and Multiple Voltage Regulator
TDA8588J	Power Amplifier and Multiple Voltage Regulator
TDA8589BJ	I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator
TDA8060ATS	Satellite ZERO-IF QPSK down-converter
TDA8715	8-Bit High-Speed Analog-to-Digital Converter
TDA8920TH	Class-D audio amplifier 2 x 80W Single chip
TDA8921TH	Class-D audio amplifier 2 x 50W single chip
TDA8944AJ	2 x 7 W BTL audio amplifier