II TDA10340; NO
The TDA1034 is a high-performance general purpose operational a~plifier. Compared to
most of the standard operationa 1 amplifiers (e. g. fJA 741, TBA221, LM301A and LM307),
it shows better noise performance, improved output drive capability and considerably
higher small-signal and power bandwidth.
This makes the device especially suitable for application in high quality and professional
audio equipment, in instrumentation and control circuits and telephonechannelamplifiers:
The op amp is internally compt;nsated for gain equal to, or higher than, three.
The frequency response can be optimized with an external compensation capacitor for
various applications (unity gain amplifier, capacitive load, slew-rate, low overshoot, etc.).
If very low noise is of prime importance, it is recommended that the TDA 1034N version
be used which has guaranteed noise specifications and somewhat lower input current.
• Small-signal bandwidth: 10 MHz
• Output drive capability 600 Q, 10 V (r. m. s.) at Vp = -VN = 18 V
• Input noise voltage
4 nV /\,f"Hz
• D. C. voltage gain
• A. C. voltage gain
• Power b~ndwidth
6000 at 10 kHz
13 V /f.is
• Large supply voltage
: ± 3 to ±20 V
PACKAGE OUTLINES (see general section).
TDA 1034; N : TO-99 (8-lead metal envelope).
TDA1034B; NB : SOT-97 (plastic 8-lead dual in-line).
TDA1034D; NO : SO-8 (SOT-96A) (plastic 8-lead flat pack).