Datasheet4U Logo Datasheet4U.com

SCN68652 - Multi-protocol communications controller MPCC

General Description

The SCN2652/68652 Multi-Protocol Communications Controller (MPCC) is a monolithic n-channel MOS LSI circuit that formats, transmits and receives synchronous serial data while supporting bit-oriented or byte control protocols.

Key Features

  • DC to 2Mbps data rate.
  • Bit-oriented protocols (BOP): SDLC, ADCCP, HDLC.
  • Byte-control protocols (BCP): DDCMP, BISYNC (external CRC).
  • Programmable operation.
  • 8 or 16-bit tri-state data bus.
  • Error control.
  • CRC or VRC or none.
  • Character length.
  • 1 to 8 bits for BOP or 5 to 8 bits for BCP.
  • SYNC or secondary station address comparison for BCP-BOP.
  • Idle transmission of SYNC/FLAG or MARK for BCP-BOP APPL.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SCN68652 (SCN2652 / SCN68652) Multi-protocol communications controller MPCC NXP
SCN68661 (SCN2661 / SCN68661) Enhanced programmable communications interface EPCI NXP
SCN6400G 64-Common Dot-matrix STN LCD Driver Avant Electronics
SCN0080G_A 80-Segment Dot-matrix STN LCD Driver Avant Electronics
SCN0080G_B 80-Segment Dot-matrix STN LCD Driver Avant Electronics

Other Datasheets by Philips Semiconductors (now NXP Semiconductors)

Part Number Description
SCN68661 Enhanced programmable communications interface EPCI
SCN68681 Dual asynchronous receiver/transmitter DUART
SCN68562 Dual universal serial communications controller DUSCC
SCN2681 Dual asynchronous receiver/transmitter DUART
SCN2681T Dual asynchronous receiver/transmitter DUART

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS SCN2652/SCN68652 Multi-protocol communications controller (MPCC) Product specification IC19 Data Handbook 1995 May 01 Philips Semiconductors Philips Semiconductors Product specification Multi-protocol communications controller (MPCC) SCN2652/SCN68652 DESCRIPTION The SCN2652/68652 Multi-Protocol Communications Controller (MPCC) is a monolithic n-channel MOS LSI circuit that formats, transmits and receives synchronous serial data while supporting bit-oriented or byte control protocols. The chip is TTL compatible, operates from a single +5V supply, and can interface to a processor with an 8 or 16-bit bidirectional data bus.