ISP1362 Datasheet PDF (Single-chip Universal Serial Bus On-The-Go controller)

ISP1362 - Single-chip Universal Serial Bus On-The-Go controller

Description

The ISP1362 is a single-chip Universal Serial Bus (USB) On-The-Go (OTG) controller integrated with the advanced Philips Slave Host Controller (PSHC) and the Philips ISP1181B Device Controller (DC).

The USB OTG controller is compliant with On-The-Go Supplement to the USB 2.0 Speciﬁcation Rev.

1.0a.

Features

s Complies fully with: x Universal Serial Bus Speciﬁcation Rev. 2.0 x On-The-Go Supplement to the USB 2.0 Speciﬁcation Rev. 1.0a s Supports data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) s Adapted from Open Host Controller Interface Speciﬁcation for USB Release 1.0a s USB OTG: x Supports Host Negotiation Protocol (HNP) and Session Request Protocol (SRP) for OTG dual-role devices x Provides status and control signals for software implementation of HNP and SRP x Provides progra.

Datasheet Details

Part number	ISP1362
Manufacturer	Philips
File Size	574.83 KB
Description	Single-chip Universal Serial Bus On-The-Go controller
Datasheet	ISP1362 Datasheet
Additional preview pages of the ISP1362 datasheet.

📁 Similar Datasheet

ISP1362 - Single-chip Universal Serial Bus On-The-Go Controller (NXP)

ISP1301 - Universal Serial Bus On-The-Go transceiver (NXP)

ISP1302 - Lite V4.2 Bluetooth Low Energy Module (Insight SiP)

ISP1303 - High Performance Bluetooth V4.2 & ANT Low Energy Module (Insight SiP)

ISP130301 - Bluetooth Low Energy Module (Insight SiP)

ISP1016E - High-Density Programmable Logic (Lattice Semiconductor)

ISP1032E - High-Density Programmable Logic (Lattice Semiconductor)

ISP1040B - Intelligent SCSI Processor (QLogic Corporation)

ISP1040B - SCSI I/O Processor (Qlogic)

Full PDF Text Transcription

Click to expand full text

ISP1362 Single-chip Universal Serial Bus On-The-Go controller Rev. 04 — 24 December 2004 Product data 1. General description The ISP1362 is a single-chip Universal Serial Bus (USB) On-The-Go (OTG) controller integrated with the advanced Philips Slave Host Controller (PSHC) and the Philips ISP1181B Device Controller (DC). The USB OTG controller is compliant with On-The-Go Supplement to the USB 2.0 Speciﬁcation Rev. 1.0a. The host and device controllers are compliant with Universal Serial Bus Speciﬁcation Rev. 2.0, supporting data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s). The ISP1362 has two USB ports: port 1 and port 2.

Published: Sep 7, 2018 |