PE300BF Datasheet | PerkinElmer Optoelectronics

Description The Cermax® xenon arc lamp is an innovative lamp design in the specialty lighting industry. These lamps were introduced in the early 1980’s and are now used in endoscopes in most major hospitals worldwide, in high brightness projection display systems, and for a wide variety of other high performance applications. The PE300BF and PE300BUV Cermax® lamps have an integrated ell parabolic reflector, enabling high intensity, focused output of ultraviolet, visible, and infrared radiation. With their internal reflector and rugged ceramic body construction, Cermax® lamps are the safest and most pact alternative to conventional quartz xenon lamps. This makes them ideal for applications that require a high degree of illumination control. Current-regulated or power-regulated power supplies with output ripples of less than 5% are remended. Single shot ignition pulses are advised because radio frequency starters may damage the lamps internal reflector. In addition to lamps, Perkin Elmer Optoelectronics manufactures Cermax® arc lamp power supplies, lamp holders, OEM lighting systems, and fiber optic light sources. Applications - Medical and industrial fiber optic illuminators - Machine vision - Infrared and visible spotlights/beacons - Spectroscopy - Microscopy - UV Curing - Video projection . .perkinelmer./opto PE300BF and PE300BUV Operational Specifications Description Power Current Operating Voltage Ignition Voltage Temperature Lifetime- Nominal 300 watts 21 amps (DC) Range 180-320 watts 10-22 amps (DC) Physical Specifications Description Arc Gap Reflector Geometry Weight Window Diameter Specification .049 inch (1.24mm) Parabolic Y2 = 0.5 X (inch) 132 grams 1 inch (25.4 mm) 14 volts (DC) 13-16 volts (DC) 23 kilovolts (remended minimum) 150 Þ C (maximum) 1000 hours (500 hour warranty) Focused Output at F/1.0 Lens Description 6mm aperture 8mm aperture Visible Output 3130 Lumens 1410 Lumens Total Output- 29 watts 14 watts - End of lamp life is defined as 50% of...