Datasheet4U Logo Datasheet4U.com

PI3V724 - 1 to 2 VGA Demux

General Description

Pericom’s PI3V724 is a 7-channel video mux/demux used to switch between multiple VGA sources or end points.

In a notebook application where analog video signals are found in both the notebook and the dock, a switch solution is required to switch between the two video port locations.

Key Features

  • ÎÎFull VGA 1:2 demux with VSIS compliance àà R, G, B, Hsync, Vsync, DDC data, and DDC clk channels are switched ÎÎIntegrated monitor detection circuit allows Automatic or manual control ÎÎGenerates hot plug output signal to inform system when monitor is present or not ÎÎDual Power Supply, 3.3V and 5V ÎÎIntegrated DDC level shifter from 5V to 3.3V(bi-directional) ÎÎIntegrated 5V H/V output buffer with +/-24mA drive ÎÎESD tolerance on video I/O pins up to +/-4kV contact per IEC61000-4-2 specificat.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PI3VDP1413A DisplayPort 3.4Gb/s Level Shifter/Redriver Pericom Semiconductor
PI3VDP1430 Dual Mode DisplayPort to HDMI Level shifter/Re-driver Pericom Semiconductor
PI3VDP1431 DisplayPort 3.4Gb/s Level Shifter/Redriver Pericom Semiconductor
PI3VDP3212 2-Lane DisplayPort Rev 1.2 Compliant Switch Pericom Semiconductor
PI3VDP411LS Digital Video Level Shifter from AC coupled digital video input to a DVI/HDMI transmitter Pericom Semiconductor

Other Datasheets by Pericom Semiconductor (now Diodes Incorporated)

Part Number Description
PI3V712-A 7-Channel Analog Video Switch
PI3V713 7-Channel Analog Video Switch
PI3V713-A 7-Channel Analog Video Switch
PI3V514 LOW ON RESISTANCE 3.3V HIGH BANDWIDTH 5-PORT 4:1 MUX/DEMUX VIDEOSWITCH
PI3V514B LOW ON RESISTANCE 3.3V HIGH BANDWIDTH 5-PORT 4:1 MUX/DEMUX VIDEOSWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PI3V724 1 to 2 VGA Demux Features ÎÎFull VGA 1:2 demux with VSIS compliance àà R, G, B, Hsync, Vsync, DDC data, and DDC clk channels are switched ÎÎIntegrated monitor detection circuit allows Automatic or manual control ÎÎGenerates hot plug output signal to inform system when monitor is present or not ÎÎDual Power Supply, 3.3V and 5V ÎÎIntegrated DDC level shifter from 5V to 3.3V(bi-directional) ÎÎIntegrated 5V H/V output buffer with +/-24mA drive ÎÎESD tolerance on video I/O pins up to +/-4kV contact per IEC61000-4-2 specification ÎÎ-3dB BW of 1.7GHz (typ) ÎÎLow Xtalk, (-38dB typ) ÎÎLow and Flat ON-STATE resistance (Ron = 4-Ohm, Ron(Flat) = 0.5ohm, typ) ÎÎLow input/output capacitance (Con = 5.