Datasheet4U Logo Datasheet4U.com

PI3USB14-A - 4:1 Mux/DeMux

General Description

The PI3USB14-A is a 2-channel, 4:1 Multiplexer/Demultiplexer with 3-state outputs.

The switch introduces no additional ground bounce noise or propagation delay.

The PI3USB14-A device is very useful in switching USB 2.0 signals and others that have high bandwidth (-3dB BW is 815MHz).

Key Features

  • ÎÎNear-Zero propagation delay ÎÎ5Ω switches connect inputs to outputs ÎÎHigh signal passing bandwidth (-3dB BW is 815MHz) ÎÎBeyond Rail-to-Rail switching ÎÎ5V I/O tolerant with 3.3V supply ÎÎ3.3V supply voltage operation ÎÎHot insertion capable ÎÎIndustrial operating temperature: -40ºC to +85ºC ÎÎESD protection àà 8kV per JESD22 test spec (HBM) àà +/-4kV per IEC61000-4-2 spec (contact) ÎÎLatch-up performance >250mA per JESD17 ÎÎPackaging (Pb-free & Green available): àà 16-pin 150-mil wide plasti.

📥 Download Datasheet

Full PDF Text Transcription for PI3USB14-A (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for PI3USB14-A. For precise diagrams, and layout, please refer to the original PDF.

Features ÎÎNear-Zero propagation delay ÎÎ5Ω switches connect inputs to outputs ÎÎHigh signal passing bandwidth (-3dB BW is 815MHz) ÎÎBeyond Rail-to-Rail switching ÎÎ5V I/...

View more extracted text
bandwidth (-3dB BW is 815MHz) ÎÎBeyond Rail-to-Rail switching ÎÎ5V I/O tolerant with 3.3V supply ÎÎ3.3V supply voltage operation ÎÎHot insertion capable ÎÎIndustrial operating temperature: -40ºC to +85ºC ÎÎESD protection àà 8kV per JESD22 test spec (HBM) àà +/-4kV per IEC61000-4-2 spec (contact) ÎÎLatch-up performance >250mA per JESD17 ÎÎPackaging (Pb-free & Green available): àà 16-pin 150-mil wide plastic QSOP (Q) àà 16-pin 173-mil wide plastic TSSOP (L) àà 20-contact TQFN (ZH) Block Diagram IA0 IA1 IA2 IA3 IB0 IB1 IB2 IB3 EN S0 S1 PI3USB14-A Low Voltage, High Bandwidth, USB 2.