PI3USB103 Datasheet | Pericom Semiconductor

Features - USB 2.0 pliant (high speed and full speed) - RON is 3.0Ω typical @ VDD = 3.0V - Low bit-to-bit skew - Low Crosstalk: - 33d B @ 480 Mbps - Off Isolation: - 30d B @ 480 Mbps - Near-Zero propagation delay: 250ps - Channel On Capacitance: 6.0p F (typ) - VDD Operating Range: 3.0V to 3.6V - Data pin I/O ESD (pins 1, 2, 4, 5, 6, and 7): ±4k V contact per IEC61000-4-2 spec - -3d B BW of 1400MHz - I/O pins have over-voltage protection and can tolerate a short to Vbus - Packaging (Pb-free & Green): - 10-contact TQFN, 1.3mm x 1.6mm x 0.75mm (ZL10) Application - Routes signals for USB 2.0 - Hand-held devices Description The PI3USB103 is a single differential channel 2:1 multiplexer/ demultiplexer USB 2.0 Switch. Industry leading advantages include a propagation delay of less than 250ps, resulting from its low channel resistance and I/O capacitance. The device multiplexes differential outputs from a USB Host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew, high channel-to-channel noise isolation and is patible with various standards, such as High Speed USB 2.0 (480 Mb/s). The PI3USB103 offers over voltage protection per the USB 2.0 specification. With the chip powered on or off, all I/O pins can withstand a short to Vbus. If VDD = 0V, the I/Os can still have signals present, and the signal will NOT leak through to VDD. Block Diagram OE Y+ Y- Truth Table SEL OE XH LL HL Y+ Hi-Z...