PI3EQX3811C Datasheet | Pericom Semiconductor

Features - SATA i/m output drive - Two 3.2Gbps differential signal pairs - Adjustable Output Emphasis - 100-Ohm Differential CML I/O’s - Input signal level detect and squelch for each channel - OOB fully supported - Low Power (180m W per Channel) - Stand-by Mode - Power Down State - VDD Operating Range: 3.3V ± 10% - Packaging (Pb-free & Green):  20-lead SSOP Description Peri Semiconductor’s PI3EQX3811C Re Driver is a lowpower signal conditioner. The device provides programmable output emphasis by using 2 select bits, EMA and EMB, to optimize performance over a variety of physical mediums by reducing Inter-Symbol Interference. PI3EQX3811C supports two 100-Ohm Differential CML data I/O’s between the Protocol ASIC to a switch fabric, across a backplane, or to extend the signals across other distant data pathways on the user’s platform. The integrated equalization circuitry provides flexibility with signal integrity of the signal before the Re Driver. Whereas the integrated de-emphasis circuitry provides flexibility with signal integrity of the signal after the Re Driver. A low-level input signal detection and output squelch function is provided for each channel. Each channel operates fully independently. When the channels are enabled (EN=1) and operating, a channel’s input signal level (on x I+/-) determines whether the output is enabled. If the input level of the channel falls below the active threshold level (Vth-) then the outputs are driven to the mon mode voltage. In addition to providing signal re-conditioning, Peri’s PI3EQX3811C also provides power management Stand-by mode operated by the Enable pin. Block Diagram Signal Detection Pin Description (Top-Side view) CML CML xl+ Equalizer xl Limiting Amp x Ox O+ VDD AI+ AIGND VDD BO+ EMx - Repeated 2 times - BOGND EMB Power Management 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 EN VDD AO+ AOGND VDD BI+ BIGND NC 09-0046 PS9033A 03/09/09 .. PI3EQX3811C 3.3V, 1-port, SATA2 i/m Re Driver™ with...