900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Pericom Semiconductor Corporation

PI3B16233AE Datasheet Preview

PI3B16233AE Datasheet

3.3V/ 16-Bit to 32-Bit FET

No Preview Available !

PI3B16233111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222
3.3V, 16-Bit to 32-Bit FET
Mux/Demux NanoSwitch
Features
• 5-ohm Switch Connection Between Two Ports
• Nea-Zero Propagation Delay
• Fast Switching Speed: 4.5ns (max.)
• Ultra -Low Quiescent Power (0.2mA typical)
- ideal for notebook applications.
• Industrial Operating Temperature: –40ºC to 85ºC
• Package (Pb-free & Green available):
- 56-pin 240-mil wide plastic TSSOP(A)
- 56-pin 300- mil wide plastic SSOP (V)
Description
Pericom Semiconductor’s PI3B16233 is a 16-bit to 32-bit mux/demux
switch. This device can be used for memory bank interleaving. The
PI3B16233 can be used as two 8-bit to 16-bit multiplexers or as one
16-bit to 32-bit multiplexer.
Two select inputs (SEL1 and SEL2) control the data flow. When the
TEST inputs are asserted HIGH, the A port is connected to both the
B1 and the B2 ports.
Block Diagram
SEL1
TEST1
30
27
Pin Configuration
SEL2
TEST2
29
28
1A 1
One of Eight
Channels
SW 55 1B2
SW 56 1B1
SW
AB
9A 15
One of Eight
Channels
SW 41 9B2
SW 42 9B1
S
Function Table
Inputs
SEL
L
H
X
TEST
L
L
H
Function
A = B1
A = B2
A = B1 and A = B2
1
PS8171E
09/29/04




Pericom Semiconductor Corporation

PI3B16233AE Datasheet Preview

PI3B16233AE Datasheet

3.3V/ 16-Bit to 32-Bit FET

No Preview Available !

PI3B16233
3.3V, 16-Bit to 32-Bit
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345F67E89T01M234u56x7/8D90e12m34u56x78N90a12n1o23S45w67i8t9c0h12
Maximum Ratings
(Above which the useful life may be impaired. For user guidelines, not tested.)
Storage Temperature ...................................................... –65°C to +150°C
Ambient Temperature with Power Applied ...................... –40°C to +85°C
Supply Voltage Range ....................................................... –0.5Vto+4.6V
DC Input Voltage ............................................................... –0.5Vto+4.6V
DC Output Current ........................................................................ 120mA
Power Dissipation ............................................................................. 0.5W
Note:
Stresses greater than those listed under MAXIMUM RAT-
INGS may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these
or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to
absolute maximum rating conditions for extended periods may
affect reliability.
DC Electrical Characteristics (Over the Operating Range, TA = –40°C to +85°C, VCC = 3.0V to 3.6V)
Parameters
Description
Test Conditions(1)
Min. Typ.(2)
VIH Input HIGH Voltage
VIL Input LOW Voltage
IIH Input HIGH Current
IIL Input LOW Current
Guaranteed Logic High Level
Guaranteed Logic Low Level
VCC = Max.; VIN = VCC
VCC = Max.; VIN = GND
2.0
–0.5
IOZH High Impedance Output Current 0 A, B VCC
VIK Clamp Diode Voltage
RON Switch ON Resistance(3)
VCC = Min, IIN = –18mA
VCC = Min., VIN = 0.0V, ION = 48mA or 64mA
VCC = Min., VIN = 2.4V, ION = 15mA
–0.7
5
10
Max.
0.8
±1
±1
±1
–1.2
8
15
Units
V
µA
V
Capacitance (TA = 25°C, f = 1 MHz)
Parameters(5)
Description
Test Conditions
Typ.
CIN Input Capacitance
CON A/B Capacitance, Switch On
VIN = 0V
3.0
25.0
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 3.3V, TA = 25°C ambient and maximum loading.
3. Measured by the voltage drop between A and B pin at indicated current through the switch. ON resistance is determined
by the lower of the voltages on the two (A,B) pins.
4. This parameter is determined by device characterization but is not production tested.
Units
pF
2
PS8171E
09/29/04


Part Number PI3B16233AE
Description 3.3V/ 16-Bit to 32-Bit FET
Maker Pericom Semiconductor Corporation
PDF Download

PI3B16233AE Datasheet PDF






Similar Datasheet

1 PI3B16233A 3.3V/ 16-Bit to 32-Bit FET
Pericom Semiconductor Corporation
2 PI3B16233AE 3.3V/ 16-Bit to 32-Bit FET
Pericom Semiconductor Corporation





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy