PS4066A Datasheet | Pericom Semiconductor

Features - - - - - - - - - - - Low On-Resistance On-Resistance Matching Between Channels, 0.2Ω typ On-Resistance Flatness, <2Ω typ Low Off-Channel Leakage, <100p A @ +25o C TTL/CMOS Logic patible GND-to-V+ Analog Signal Dynamic Range Low Power Consumption (<12µW) Low Crosstalk: -86d B @ 1MHz Low Off-Isolation: -58d B @ 1 MHz Wide Bandwidth: > 100 MHz Small QSOP-16 Package Saves Board Area Description The PS4066/PS4066A are improved SPST CMOS analog switches ideal for low-distortion audio switching. These high precision, medium voltage switches were designed to operate with single-supplies from +3V to 16V. They are fully specified with +12V, +5V, and +3V supplies. The PS4066/PS4066A has four normally open (NO) switches. Each switch conducts current equally well in either direction when on. In the off state each switch blocks voltages up to the power-supply rails. With +12V power supply, the PS4066/PS4066A guarantee <45Ω on-resistance. On-resistance matching between channels is within 2Ω (PS4066). On-resistance flatness is less than 4Ω (PS4066A) over the specified range. The PS4066A guarantees low leakage currents (<100p A @ 25o C, <6n A @ +85o C) and fast switching speeds (t ON < 175ns). ESD sensitivity rating is >2,000V per MIL-STD 883, Method 3015.7 Both devices are available in PDIP-14, narrow-body SOIC-14, and QSOP-16 packages. Available temperature ranges are: mercial (0o C to 70o C), and industrial (-40o C to +85o C). For operation below 5V, the PI5A101/PI5A391/PI5A392 are also remended. Applications - - - - - - Instrumentation, ATE Sample-and-Holds Audio Switching and Routing Telemunication Systems PBX, PABX Battery-Powered Systems Functional Diagrams, Pin Configurations, and Truth Table Logic 0 1 Switch O FF ON Top View PDIP/SO N.C. = No Internal Connection Switches shown for logic “0” input Top View QSOP PS8184A 10/15/98 PS4066/PS4066A Low-Cost, Quad, SPST, CMOS Analog Switches 123456789012345678901234567890121234567890123456789012345678901212345678901234...