HDMI 2.0, DisplayPort 1.2 Video Switch
ÎÎ4-lane, 1:2 mux/demux that will support RBR, HBR1, or
ÎÎData rate: 3.4 Gbps to 6.0 Gbps for high data channels
ÎÎ1-channel 1:2 mux/demux for HPD signal
ÎÎDifferential switch matrix for DP AUX and HDMI DDC
ÎÎsupports 720 Mbps high-speed DP AUX
ÎÎ-2.0 dB Insertion Loss for Dx channels @ 3 GHz
ÎÎ-3 dB Bandwidth for Dx channels: 4.1 GHz
ÎÎReturn loss for Dx channels @ 3 GHz: -12 dB
ÎÎLow Crosstalk for high speed channels: -25 dB@ 6 Gbps
ÎÎLow Off Isolation for high speed channels: -24dB@ 6 Gbps
ÎÎLow channel-to-channel skew, 35ps max
ÎÎLow Bit-to-Bit Skew, 5ps typ (between '+' and '-' bits)
ÎÎVDD Operating Range: 3.3V +/-10%
ÎÎESD Tolerance: 2kV HBM
ÎÎPackaging (Pb-free & Green):
-50-ball TFBGA (NEE)
-52-pin TQFN (ZL52)
Pericom Semiconductor’s PI3WVR12612 is a multi-standard
video switch with wide voltage range capability. It supports
DisplayPort 1.2, HDMI 2.0, and emerging and proprietary standards.
PI3WVR12612 can pass high-speed signals up to 1.2 V peak-
to-peak differential with a common-mode voltage from 0 to
3.4V. The wide voltage range allows DC-coupled multi-standard
operation. Eliminating AC coupling capacitors saves board space
and improves signal integrity for dense PCB designs.
The high speed channels can also pass 0V-3.3V CMOS signals up
In addition to four high-speed lanes, PI3WVR12612 also switch-
es AUX, DDC, and HPD signals.
Routing of DisplayPort and HDMI signals with low signal at-
tenuation between source and sink.
All trademarks are property of their respective owners.