Datasheet4U Logo Datasheet4U.com

PI3USB14 - Low Voltage High Bandwidth / USB 2.0 4:1 Mux/DeMux

General Description

The PI3USB14 is a 2-channel, 4:1 Multiplexer/Demultiplexer with 3-state outputs.

The switch introduces no additional ground bounce noise or propagation delay.

The PI3USB14 device is very useful in switching USB 2.0 signals and others that have high bandwidth (300MHz).

Key Features

  • Near-Zero propagation delay.
  • 5Ω switches connect inputs to outputs.
  • High signal passing bandwidth (300MHz).
  • Beyond Rail-to-Rail switching.
  • 5V I/O tolerant with 3.3V supply.
  • 2.5V and 3.3V supply voltage operation.
  • Hot insertion capable.
  • Industrial operating temperature: -40ºC to +85ºC.
  • 2KV ESD Protection (human body model).
  • Latch-up performance >250mA per JESD17.
  • Packaging (Pb-free & Green availabl.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PI3USB14-A 4:1 Mux/DeMux Pericom Semiconductor Corporation
PI3USB10 3.3V/ Wide Bandwidth/ 2-Channel/ 2:1 Mux/DeMux USB 2.0 Switch w/ Single Enable ETC
PI3USB102E USB 2.0 High-Speed Switch DIODES
PI3USB103 USB 2.0 High-Speed Signal Switch DIODES
PI3USB103 USB 2.0 High-Speed (480 Mbps) Signal Switch Pericom Semiconductor Corporation

Other Datasheets by Pericom Semiconductor (now Diodes Incorporated)

Part Number Description
PI3USB10 2:1 Mux/DeMux USB 2.0 Switch w/ Single Enable
PI3USB102 USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted
PI3USB102E USB 2.0 High-Speed (480 Mbps) Switch
PI3USB102G USB 2.0 High-Speed (480 Mbps) Switch
PI3A412 Quad SPDT Analog Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PI3USB14 Low Voltage, High Bandwidth, USB 2.0, 4:1 Mux/DeMux with Single Enable Features • Near-Zero propagation delay • 5Ω switches connect inputs to outputs • High signal passing bandwidth (300MHz) • Beyond Rail-to-Rail switching • 5V I/O tolerant with 3.3V supply • 2.5V and 3.3V supply voltage operation • Hot insertion capable • Industrial operating temperature: -40ºC to +85ºC • 2KV ESD Protection (human body model) • Latch-up performance >250mA per JESD17 • Packaging (Pb-free & Green available): – 16-pin 150-mil wide plastic QSOP (Q) – 16-pin 173-mil wide plastic TSSOP (L) – 20-contact TQFN (ZH) Description The PI3USB14 is a 2-channel, 4:1 Multiplexer/Demultiplexer with 3-state outputs. The switch introduces no additional ground bounce noise or propagation delay.