PI3USB102G Datasheet | Pericom Semiconductor

USB 2.0 High-Speed (480 Mbps) Switch with 5V Protection with Improved Ioff Voltage Range Features - USB 2.0 pliant (high speed, full speed, and low speed) - RON: 4.0Ω typical @ VDD = 3.0V - Channel On Capacitance: 6.0p F - Wide -3d B Bandwidth: 1,000MHz - Low bit-to-bit skew - Low Crosstalk: -29B @ 480 Mbps - Off Isolation: -28d B @ 480 Mbps - Near-Zero propagation delay: 250ps - Support 1.8-V logic on control pins - VDD Operating Range: 3.0V to 5.5V - ESD: 8k V HBM on Y+/Y- pins per JESD22 standard - Y+/Y- pins have over-voltage protection and can tolerate a short to VBUS - Packaging (Pb-free & Green): 10-contact TQFN, 1.3mm x 1.6mm x 0.75mm (ZL10) Description The PI3USB102G is a single differential channel 2:1 multiplexer/ demultiplexer USB 2.0 Switch. Industry leading advantages include a propagation delay of 250ps, resulting from its low channel resistance and I/O capacitance. PI3USB102G is bidirectional and offers very little attenuation of high-speed signals. It is designed for low bit-to-bit skew, high channel-to-channel noise isolation and is patible with various standards, such as High Speed USB 2.0 (480 Mb/s). The PI3USB102G offers over voltage protection for the Y+/Y- pins as per the USB 2.0 specification. With the chip powered on or off if Y+/Y- pins are shorted to VBUS (5V +/- 5%), M+/M- and D+/Doutputs are clamped to provide voltage protection for downstream devices. The PI3USB102G has a better Y+/Y- power-off leakage current with the voltage range of 0V to 5V versus 0V to 3.3V for the PI3USB102E. Application - Routes signals for USB 2.0 - PC, Notebooks and Hand-held devices Block Diagram over voltage protection Y+ Yover voltage protection SEL OE Control Logic M+ M- D+ D- 14-0136 1 09/18/14 Truth...