900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Pericom Semiconductor

PI3HDMI413 Datasheet Preview

PI3HDMI413 Datasheet

DVI/HDMI Compliant Signal Switch

No Preview Available !

www.DataSheet4U.com
PI3HDMI413
4-Differential Channel, 3:1 Mux/DeMux, DVI/HDMI Compliant
Signal Switch based on TMDS Signaling Standard
Features
• 4-Differential Channel 3:1 Mux/DeMux
• TMDS Signaling
• Data Rate: 1.65Gbps
• Crosstalk: -30dB@1.65Gbps
• Switching speed: 4ns
• Isolation: -35dB@1.65Gbps
• ESD: Data bits @ 8kV HBM, select bit @ 2 kV HBM
• Near-Zero Prop Delay: 250ps max.
• Low bit-to-bit skew
• Hot insertion capable
• Enable/Disable Time: 9ns
• Bidirectional
• Packaging (Pb-free & Green):
64-pin TSSOP (A)
Description
Pericom Semiconductor’s PI3HDMI series of switch circuits are
targeted for high-resolution video networks that are based on DVI/
HDMI standards, and TMDS signal processing. The PI3HDMI413
is a 12- to 4-Differential Channel Mux/DeMux Switch. The device
multiplexes differential signals to one of three corresponding out-
puts. The switch is bidirectional and offers little or no attenuation
of the high-speed signals at the outputs. It is designed for low bit-
to-bit skew and high channel-to-channel noise isolation.
The maximum DVI/HDMI data rate of 1.65Gbps provides the reso-
lution required by the next generation HDTV and PC graphics.
Because of its passive bidirectional feature, this switch can be
used either at the video drivers side or at the receiver side. For PC
graphics applications, the device sits at the drivers side to switch
between multiple display units such as PC LCD monitor, projector,
TV, etc. For consumer video applications, the device sits at the
receiver end to switch between the source components such as
DVD, D-VHS, STB, etc.
Block Diagram
Pin Description
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
��
�������
�����
��
��
��
��
��
��
��
��
��
��
�� ���
�� ���
��
��
��
��
��
��
��
��
�� ���
�� ��
��
��
��
��
��
��
��
��
��
��
��
��
�� ��
��
��
��
��
�� ��
�� ���
�� ��
1 PS8796 11/14/05




Pericom Semiconductor

PI3HDMI413 Datasheet Preview

PI3HDMI413 Datasheet

DVI/HDMI Compliant Signal Switch

No Preview Available !

PI3HDMI413
4-Differential Channel, 3:1 Mux/DeMux, DVI/HDMI
Compliant Signal Switch based on TMDS Signaling Standard
Truth Table for X=[0,3]
S2 S1
0 0 Ax = xB1
0 1 Ax = xB2
1 0 Ax = xB3
1 1 Ax = Hi-Z
Function
Truth Table for X=[4,7]
S4 S3
0 0 Ax = xB1
0 1 Ax = xB2
1 0 Ax = xB3
1 1 Ax = Hi-Z
Function
Pin Description
Pin #
Pin
Name
Description
2,8,13,15,16,18,21,26,
31,33,40,53,64
VDD
+ Power supply 3.30
1,3,4,5,14,17,27,28,29,
30,32,34,35,54,63
VSS
- Power supply
6,7,19,20
Sx
Select pin, see truth
table
9,10,11,12,22-25,36-
39,41-52,55-62
xBy & Differential data
Ax signals
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
Storage Temperature ................................................... –65°C to +150°C
Supply Voltage to VSS Potential...................................... –0.5V to +2.5V
DC Input Voltage .................................................................. VSS to VDD
DC Output Current ...................................................................... 120mA
Power Dissipation .......................................................................... 0.5W
Note:
Stresses greater than those listed under MAXIMUM RATINGS
may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other
conditions above those indicated in the operational sections of
this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect reliability.
DC Power Supply Characteristics
Paramenter
Description
VDD
Positive Power Supply
VSS Negative Power Supply
Min.
3.0
1.5
Max.
3.6
1.6
Units
V
V
DC Electrical Characteristics for Switching over Operating Range (TA = –40°C to +85°C)
Paramenter
Description
Test Conditions(1)
Min.
Typ.(2)
Max.
VIH(3)
Input HIGH Voltage Guaranteed HIGH level 0.65(VDD-VSS)+VSS
VIL(3)
Input LOW Voltage Guaranteed LOW level
–0.5+VSS
0.35(VDD-VSS)+VSS
VIK Clamp Diode Voltage VDD=Max., IIN=–18mA
–0.7+VSS
–1.2+VSS
IIH Input HIGH Current VDD=Max., VIN=VDD
±5
IIL Input LOW Current VDD=Max., VIN=VSS
±5
Units
V
µA
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at TA = 25°C ambient and maximum loading.
3. VIH + VIL are for SEL input only.
2
PS8796
11/14/05


Part Number PI3HDMI413
Description DVI/HDMI Compliant Signal Switch
Maker Pericom Semiconductor
PDF Download

PI3HDMI413 Datasheet PDF






Similar Datasheet

1 PI3HDMI411AD DVI / HDMI Re-Driver w/ Equalization
Pericom Semiconductor
2 PI3HDMI412-A DVI/HDMI Compliant Signal Switch
Pericom Semiconductor
3 PI3HDMI412FT DVI/HDMI Compliant Signal Switch
Pericom Semiconductor
4 PI3HDMI413 DVI/HDMI Compliant Signal Switch
Pericom Semiconductor
5 PI3HDMI414 DVI/HDMI Compliant Signal Switch
PERICOM





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy