900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Pericom Semiconductor

PI3CH480 Datasheet Preview

PI3CH480 Datasheet

4-Channel 2:1 Mux/Demux NanoSwitch

No Preview Available !

PI3CH480
Low Voltage, High-Bandwidth, 4-Channel
2:1 Mux/Demux, NanoSwitch™
Product Features
• Near-zero propagation delay
• 5Ω switches connect inputs to outputs
• High signal passing bandwidth (500MHz)
• Beyond Rail-to-Rail switching
• 5V I/O tolerant with 3.3V supply
• 2.5V and 3.3V supply voltage operation
• Hot insertion capable
• Industrial operating temperature: -40ºC to +85ºC
• 2KV ESD Protection (human body model)
• Latch-up performance >250mA per JESD17
• Packages available:
– 16-pin 150-mil wide plastic QSOP (Q)
– 16-pin 173-mil wide plastic TSSOP (L)
Block Diagram
www.DataSheet4U.com
IA0 IA1 IB0 IB1 IC0 IC1 ID0 ID1
Product Description
Pericom Semiconductor’s PI3CH series of switch circuits are
produced using the Company’s advanced sub-micron CMOS
technology, achieving industry leading performance.
The PI3CH480 is a 4-channel, 2:1 Multiplexer/Demultiplexer with
3-state outputs. The switch introduces no additional ground bounce
noise or propagation delay.
The PI3CH480 device is very useful in switching signals that have
high bandwidth (500MHz).
Pin Configuration
���
���
��
����
���
���
���
������
����
��
��
��
��
��
��
��
��
���
���
���
��
���
���
���
���
� ��
�� ��
���
��
���
��
����������
���� ��
��
���
���
��
���
�� ���
�� � � �� ���
EN
S
YA YB YC YD
Truth Table(1)
EN S YA
H X Hi-Z
L L IA0
L H IA1
Notes:
H=High Voltage Level
L=Low Voltage Level
YB
Hi-Z
IB0
IB1
YC
Hi-Z
IC0
IC1
YD Function
Hi-Z Disable
ID0 S=0
ID1 S=1
Pin Description
Pin Name
Description
IAN to IDN
Data Inputs
S Select Inputs
EN Enable
YA to YD
Data Outputs
GND
Ground
VCC Power
1
PS8728A
04/23/04




Pericom Semiconductor

PI3CH480 Datasheet Preview

PI3CH480 Datasheet

4-Channel 2:1 Mux/Demux NanoSwitch

No Preview Available !

PI3CH480
Low Voltage, High-Bandwidth, 4-Channel
2:1 Mux/Demux, NanoSwitch™
Maximum Ratings
(Above which the useful life may be impaired. For user guidelines, not tested.)
Storage Temperature ................................................ –65°C to +150°C
Ambient Temperature with Power Applied ............... –40°C to +85°C
Supply Voltage to Ground Potential ........................... –0.5V to +4.6V
DC Input Voltage ........................................................ –0.5V to +6.0V
DC Output Current................................................................... 120mA
Power Dissipation ....................................................................... 0.5W
Note:
Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these
or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect re-
liability.
DC Electrical Characteristics, 3.3V Supply (Over Operating Range, TA = –40°C to +85°C, VCC = 3.3V ± 10%)
Parameters
Description
Test Conditions(1)
Min. Typ(2) Max.
VIH Input HIGH Voltage
Guaranteed Logic HIGH Level
2.0
VIL Input LOW Voltage
Guaranteed Logic LOW Level
–0.5 0.8
VIK Clamp Diode Voltage
VCC = Min., IIN = –18 mA
-1.3 –1.8
IIH Input HIGH Current
VCC = Max., VIN = VCC
±1
IIL Input LOW Current
VCC = Max., VIN = GND
±1
IOZH
High Impedance Output Current 0 ≤ Y, IN ≤ VCC
±1
VCC = Min., VIN = 0.0V,
RON
Switch On Resistance(4)
ION = 48 mA or -64mA
VCC = Min., VIN = 3.6V, ION = -15 mA
46
58
Units
V
µA
DC Electrical Characteristics, 2.5V Supply (Over Operating Range, TA = –40°C to +85°C, VCC = 2.5V ± 10%)
Parameters(5)
Description
Test Conditions
Min. Typ.
Max.
Units
VIH
Input HIGH Voltage
Guaranteed Logic HIGH Level
1.8 – VCC + 0.3
VIL
Inout LOW Voltage
Guaranteed Logic LOW Level
–0.3 – 0.8 V
VIK
Clamp Diode Voltage
VCC = Max., IIN = –6mA
– –0.7
–1.8
IIH
Input HIGH Current
VCC = Max., VIN = VCC
––
±1
IIL
IOZH
Input LOW Current
High Impedance Current(3)
VCC = Max., VIN = GND
0 ≤ Y, In ≤ VCC
– – ±1 µA
––
±1
VCC = Min., VIN =0.0V,
RON
Switch On Resistance(4)
ION = –48mA
VCC = Min., VIN = 2.25V,
ION = -15mA
–6
8
–7
14
2
PS8728A
04/23/04


Part Number PI3CH480
Description 4-Channel 2:1 Mux/Demux NanoSwitch
Maker Pericom Semiconductor
PDF Download

PI3CH480 Datasheet PDF






Similar Datasheet

1 PI3CH480 4-Channel 2:1 Mux/DeMux
Diodes
2 PI3CH480 4-Channel 2:1 Mux/Demux NanoSwitch
Pericom Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy