EEEHA1H221P Datasheet | Panasonic

ecifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan d W.V. (V) Characteristics at Low Temperature Z(- 25 °C)/Z(+20 °C) Z(- 40 °C)/Z(+20 °C) 6.3 4 8 10 3 6 - 40 °C to +105 °C 6.3 V.DC to 100 V.DC 1 μF to 1500 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached standard products list 16 2 4 25 2 4 35 2 3 50 2 3 63 3 4 100 3 4 (Impedance ratio at 120 Hz) After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Endurance Capacitance change tan d DC leakage current Shelf Life ±20 % of initial measured value (6.3 W.V. of miniature : ±30 %) < 200 % of initial specified value < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change tan d DC leakage current ±10 % of initial measured value < initial specified value < initial specified value Resistance to Soldering Heat - Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 0.70 120 1.00 1k 1.30 10 k to 1.70 (Unit : mm) (I) (I) ( ) Reference size W 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P 1.0 1.5 1.8 1.8 2.2 3.1 4.6 (P) W I 1.8 2.2 2.6 2.6 3.4 3.4 3.5 K A±0.2 - Marking Example:6.3 V 22 μF (Polarized) Marking color : BLACK - Dimensions in mm (not to scale) 0.3 max. 0D±0.5 - B±0.2 H Negative polarity marking (- ) Capacitance (μF) K )" Lot number L Pressure Relief (010 and larger) Size code B C + Series identification Mark for Lead-Free Products Black Dot (Square) Rated voltage Mark D 4.0 5.0 6.3 6.3 8.0 8.0 10.0 L 5.4 +- 0.1 0.2 5.4 5.4 + 0.1 - 0.2 + 0.1 - 0.2 A, B 4.3 5.3 6.6 6.6...