EEEFC1xxxxx Datasheet | Panasonic

.. Aluminum Electrolytic Capacitors/ FC Surface Mount Type Type : V Series: FC FC High temperature Lead-Free reflow(suffix:Ai) n Features Endurance : 105°C 1000 h, 5.4mm height( φ6.3) Low impedance (1/2 for HA series) Vibration-proof product is available upon request.(φ8 <=) Ro HS directive pliant < = Country of Origin Japan Malaysia n Specifications Category temp. range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ Characteristics at Low Temperature -40 to +105°C 6.3 to 50 V .DC 1 to 1500 µ F ±20 % (120Hz/+20°C) (Whichever is greater) I< = 0.01 CV or 3(µ A) after 2 minutes Please see the attached standard products lists W.V. (V) -25 / +20 °C -40 / +20 °C 6.3 2 3 10 2 3 16 2 3 25 2 3 35 2 3 50 2 3 (Impedance ratio at 120 Hz) Endurance Shelf Life Resistance to Soldering Heat After applying rated working voltage for 1000 hours at +105±2°C and then being stabilized at +20°C, capacitors shall meet the following limits. Capacitance change ±20% of initial measured value < tan δ = 200 % of initial specified value DC leakage current < = initial specified value After storage for 1000 hours at +105±2°C with no voltage applied and then being stabilized at +20°C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering and then being stabilized at +20°C, capacitor shall meet the following limits. Capacitance change ±10% of initial measured value < initial specified value tan δ = < initial specified value DC leakage current = n Marking Example:35V 1 µF (Polarized) Lead-Free products n Dimensions in mm (not to scale) 0.3 max A±0.2 ( )reference size (I) (I) (P) K Negative polarity marking Series identification V FC . Mark for Lead-Free products (Black circle) E, F, G =L±0.3 L +0.1 -0.2 I 1.8 2.2 2.6 3.4 3.4 3.5 W 0.65 ± 0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P 1.0 1.5 1.8 2.2 3.1 4.6 Capacitance (µF) B±0.2 W.V. code φD±0.5 w K 0.35 0.35 0.35...