Datasheet4U Logo Datasheet4U.com

AN8245SCR - Laser Disk Spindle Motor Controller

Download the AN8245SCR datasheet PDF. This datasheet also covers the AN8245K variant, as both devices belong to the same laser disk spindle motor controller family and are provided as variant models within a single manufacturer datasheet.

Features

  • Operating supply voltage range : VCC1=10.8 to 13.2V VCC2=10.8 to 22V.
  • 3-sensor 3-phase full-wave current drive ; power transistor built-in.
  • Maximum motor drive current : IMmax. =1.5A.
  • Digital PLL control.
  • Bidirectional torque control.
  • Provided with reverse detector and stop detector.
  • Synchronizing signal and stop signal output.
  • Built-in thermal protective and current limiter functions s.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (AN8245K_Matsushita.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number AN8245SCR
Manufacturer Panasonic
File Size 391.24 KB
Description Laser Disk Spindle Motor Controller
Datasheet download datasheet AN8245SCR Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AN82 CMOS Gate Array AMI
AN82 HIGH-DENSITY MULTI CHANNEL OC-48 LAYOUT GUIDELINES Silicon Laboratories
AN82526 Controller Area Network Chip Intel
AN82527 SERIAL COMMUNICATIONS CONTROLLER Intel Corporation
AN826 Crystal Oscillator Basics and Crystal Selection Microchip

Other Datasheets by Panasonic

Part Number Description
AN8245K Laser Disk Spindle Motor Controller
AN8212K FDD Spindle Motor Controller
AN8221FB HDD Sensor-Less Motor Driver IC
AN8290NS Spindle Motor PWN Driver
AN8290NS Spindle Motor PWN Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ICs for Motor AN8245K, AN8245SCR Laser Disk Spindle Motor Controller s Overview The AN8245K and AN8245SCR are speed control drive ICs of the brushless motors by means of the 3-phase fullwave current drive system. They are suitable for controlling/driving the laser disk spindle motors, LBP polygon mirror motors, and so on. s Features • Operating supply voltage range : VCC1=10.8 to 13.2V VCC2=10.8 to 22V • 3-sensor 3-phase full-wave current drive ; power transistor built-in • Maximum motor drive current : IMmax.=1.
Published: |