AMS302 Datasheet | Panasonic

Light Sensor (AMS1, 3) Cadmium-free sensor with spectral response The Through-hole Type for easy implementation as a Cd S cell replacement - SMD type LIGHT SENSOR TYPICAL APPLICATIONS 1. Brightness detection for LCD backlight control for LCD devices (mobile phones, LCD TVs, car navigation systems, mobile PCs, and PDAs). 2. Brightness detection for controlling the keypad backlight in mobile phones. 3. Brightness detection for circuits in household lighting, crime prevention lighting, and automatic lighting for bicycle. 4. Brightness detection for wall clocks (radio clocks). Features 1. Built-in optical filter for spectral response similar to that of the human eye. Peak sensitivity wavelength is 580 nm 1.0 Na Pi Ca spectral Human spectral Relative sensitivity L 2.0mm .079inch W 3.2mm .126inch H 1.0mm .039inch Amplifier 12 Anode 34 Cathode .. - Through-hole type 0 300 400 500 600 700 800 900 1000 1100 Wavelength, nm 5.0 mm dia. .197 inch dia. (Surface of resin) Amplifier 1 Anode 2 Cathode Ro HS Directive patibility information http://.nais-e./ 2. Photocurrent is proportional to illumination. (linear output) High photocurrent is achieved by built-in photocurrent amp. IL = 260 µA (typical) Ev = 100 lx (florescent light) 3. Uses environmentally friendly silicon chips. 4. Lead-free. 5. Operates on 1.5 to 6 V DC, which is suitable for battery operation. 6. pact, SMD package Same through-hole shape as Cd S cell. TYPES Photo current 260 µA- Tape and reel package SMD type (Picked from the 1/4-pin side) AMS104Y Packing quantity: Tape and reel package SMD type: Inner 3,000 pcs., Outer 3,000 pcs. Tape and reel pckage Through-hole type: Inner 2,000 pcs., Outer 2,000 pcs. Baggage package Through-hole type: Inner 500 pcs., Outer 1,000 pcs. Part No. Tape and reel package Through-hole type AMS302T Baggage package AMS302 Note- : Ev = 100 lx (Fluorescent lamp is used as light source) Tape package is the standard...