P-tec Corp.
Tel:(800)688-0613
2405 Commerce Circle Tel:(719) 589 3122
Alamosa Co. 81101 Fax:(719) 589 3592
www.p-tec.net
sales@p-tec.net
PL519 Series 5mm LED Snap-in Panel Mount Holder
Features
*Snap-in Design Requires no Hardware
*Mounting Hole 6.35 mm (0.25”)
*Housing Material Black Nylon UL94V-2
*1 Green LED with Color Diffused
Lens used
*26AWG 6” (+) Red and (-) Black Wire
Leads
*Integrated Resistor for 12V Operation
*RoHS Compliant
Absolute Maximum Ratings at TA = 25 °C
Power Dissipation……………………………………………………………….... 78mW
Reverse Voltage (<100μA)….………………..……...…...…….………………….…. 5.0V
Max Forward Current…….…………..………………….……..…………………. 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)……........…………….….. 100mA
Operating Temperature Range……………………………………….…. -25°C to +85°C
Storage Temperature Range……………….....……………………….. –40°C to +100°C
Soldering Temperature (1.6 mm below body)………....………………….... 260° for 5 seconds
Part Number
6” Wire Leads
Electrical & Optical Characteristics at TA = 25 °C
Emitting
Color
Chip
Material
Peak Dominant Viewing
Wave Wave Angle
Length Length 2θ ½
nm nm Deg
Forward
Voltage
@20mA (V)
Typ Max
Luminous
Intensity
@20mA (mcd)
Min Typ
PL519-1G13-212V
Green
GaP 567
572
38° 12.0 15.0 11.0 25.0
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified.
0.80
10.60
7.10 4.80
2.80 ±0.5
4.40 ±0.5
0.20
+0.1
-0.0
Black Cathode
6.10
Red Anode
Stripped & Tinned
152.0 Typical
09-06-07 Rev 0 RS
