900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Omron

XG2 Datasheet Preview

XG2 Datasheet

Flat Cable Connectors

No Preview Available !

Flat Cable Connectors for PCBs
XG2
Ideal for high-density mounting.
IDC design allows for quick termination.
• Part of a total flat cable wiring solution, when used in
conjunction with XG4, XG5 and XG8 sockets and plugs.
• End terminates cable to a PCB or acts as a pass through
for connection to other cables or PCB’s.
• Uses a standard 2.54-mm grid terminal arrangement for
easier design of circuits.
• Terminal Arrangement: standard or reverse.
• Uses UL94V-0 approved insulation material.
• IDC Assembly Tools are available.
XG2 Connectors
Terminal Arrangement
The contact numbers are not marked on the Connector. If the cables are numbered from 1 starting from the edge, the relationship between the
wires and the terminals would be as shown below.
Standard Terminal
Arrangement
Reverse Terminal
Arrangement
Cable No.
Cable No.
http://www.DataSheet4U.net/
Cable No.
Cable number arrangement (top view)
Ratings and Characteristics
Rated current
1A
Rated voltage
250 VAC
Contact resistance 15 mΩ max. (at 20 mV, 100 mA max.)
Insulation resistance 1,000 MΩ min. (at 500 VDC)
Dielectric strength 500 VAC for 1 min. (leakage current: 1 mA
max.)
Operating
temperature
55°C to 85°C (with no icing at low
temperature)
Cable No.
Materials and Finish
Base
Fiber-glass reinforced PBT resin
(UL94V-0)/black
Contacts Mating end Copper alloy/nickel base, tin plating
Terminals Copper alloy/nickel base, tin plating
Cover
Fiber-glass reinforced PBT resin
(UL94V-0)/black
Applicable Wires
1.27-mm pitch, AWG28, 7-strand flat cable.
UL2651 (standard cable)
UL20012 (folding cable)
UL20028 (color-coded cable)
Flat Cable Connectors for PCBs XG2
61
datasheet pdf - http://www.DataSheet4U.net/




Omron

XG2 Datasheet Preview

XG2 Datasheet

Flat Cable Connectors

No Preview Available !

Double-row PCB Bus Connectors
XG2A
Dimensions
Standard Terminal Arrangement: XG2A-@@01
Reverse Terminal Arrangement: XG2A-@@02
No. of Dimensions (mm)
contacts
A
B
10 17.9 10.16
14 22.9 15.24
16 25.5 17.78
20 30.6 22.86
26 38.2 30.46
30 43.3 35.56
34 48.3 40.64
40 56.0 48.26
50 68.7 60.96
60 81.4 73.66
64 86.4 78.74
Ordering Information
Appearance
Mounting holes (bottom view)
Standard terminal arrangement
Reverse terminal arrangement
0.8
+0.1
0
dia.
0.8
+0.1
0
dia.
Note: The cover is an open-end type.
http://www.DataSheet4U.net/
No. of contacts
10
14
16
20
26
30
34
40
50
60
64
Connectors with
standard terminal arrangement
XG2A-1001
XG2A-1401
XG2A-1601
XG2A-2001
XG2A-2601
XG2A-3001
XG2A-3401
XG2A-4001
XG2A-5001
XG2A-6001
XG2A-6401
Connectors with
reverse terminal arrangement
XG2A-1002
XG2A-1402
XG2A-1602
XG2A-2002
XG2A-2602
XG2A-3002
XG2A-3402
XG2A-4002
XG2A-5002
XG2A-6002
XG2A-6402
Precautions
Correct Use
Handling
There is no Strain Relief for the PCB Connector. Leave enough
slack to avoid tension on the cable.
Terminals can be press fit no matter which direction the base and
cover are facing.
See “XG@ - Assembly Tooling and Accessories” datasheet for infor-
mation on flat cable / connector assembly tools.
Automated Soldering Conditions (Jet Flow)
1. Soldering temperature: 250 ± 5°C
2. Continuous soldering time: Within 5 s
62 Flat Cable Connectors for PCBs XG2
datasheet pdf - http://www.DataSheet4U.net/


Part Number XG2
Description Flat Cable Connectors
Maker Omron
PDF Download

XG2 Datasheet PDF






Similar Datasheet

1 XG-2102CA LOW-JITTER SAW OSCILLATOR
EPSON
2 XG-2121 LOW-JITTER SAW OSCILLATOR
EPSON
3 XG-762M IEEE 802.11b/g USB-Module
Zcomax
4 XG-NV2E Operation Manual
Sharp
5 XG-NV2U Operation Manual
Sharp
6 XG2 Flat Cable Connectors
Omron
7 XG2Z Screw Terminal Block Cables
Omron
8 XG4 Flat Cable Connectors
Omron Electronics
9 XG4A Flat Cable Connectors
Omron Electronics





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy