Datasheet4U Logo Datasheet4U.com

P1014AP06 - Self-Supplied Monolithic Switcher

This page provides the datasheet information for the P1014AP06, a member of the P1013AP13 Self-Supplied Monolithic Switcher family.

Datasheet Summary

Description

Pin No.

Pin No.

ally 10 mF.

VCC participates to the frequency jittering.

Features

  • Built.
  • in 700 V MOSFET with Typical RDSon of 11 W and 22 W.
  • Large Creepage Distance Between High.
  • Voltage Pins.
  • Current.
  • Mode Fixed Frequency Operation: 65 kHz.
  • 100 kHz.
  • 130 kHz.
  • Skip.
  • Cycle Operation at Low Peak Currents Only: No Acoustic Noise!.
  • Dynamic Self.
  • Supply, No Need for an Auxiliary Winding.
  • Internal 1.0 ms Soft.
  • Start.
  • Latched Overvoltage Protection with Auxilia.

📥 Download Datasheet

Datasheet preview – P1014AP06

Datasheet Details

Part number P1014AP06
Manufacturer ON Semiconductor
File Size 483.17 KB
Description Self-Supplied Monolithic Switcher
Datasheet download datasheet P1014AP06 Datasheet
Additional preview pages of the P1014AP06 datasheet.

📁 Similar Datasheet

  • P1010AT - N-Channel MOSFET (NIKO-SEM)
  • P1010ATF - N-Channel MOSFET (NIKO-SEM)
  • P10150D - MOS Schottky Rectifier (PFC Device Corporation)
  • P10150E - MOS Schottky Rectifier (PFC Device Corporation)
  • P101W - PASSIVATED ASSEMBLED CIRCUIT ELEMENTS (International Rectifier)
  • P100 - PASSIVATED ASSEMBLED CIRCUIT ELEMENTS (International Rectifier)
  • P1000A - Standard Recovery Rectifier Diodes (Diotec Semiconductor)
  • P1000A - Standard silicon rectifier diode (Semikron International)
  • P1000B - Standard Recovery Rectifier Diodes (Diotec Semiconductor)
  • P1000B - Standard silicon rectifier diode (Semikron International)
Other Datasheets by ON Semiconductor
  • P1014AP - NCP1014AP
  • P1014AP - Self-Supplied Monolithic Switcher
  • P1014AP10 - Self-Supplied Monolithic Switcher
  • P1010AP - Self-Supplied Monolithic Switcher
  • P1010AP06 - Self-Supplied Monolithic Switcher
  • P1010AP10 - Self-Supplied Monolithic Switcher
  • P1010AP13 - Self-Supplied Monolithic Switcher
  • P1011AP - Self-Supplied Monolithic Switcher

Full PDF Text Transcription

Click to expand full text
NCP1010, NCP1011, NCP1012, NCP1013, NCP1014 Self-Supplied Monolithic Switcher for Low StandbyPower Offline SMPS The NCP101X series integrates a fixed−frequency current−mode controller and a 700 V MOSFET. Housed in a PDIP−7 or SOT−223 package, the NCP101X offers everything needed to build a rugged and low−cost power supply, including soft−start, frequency jittering, short−circuit protection, skip−cycle, a maximum peak current setpoint and a Dynamic Self−Supply (no need for an auxiliary winding). Unlike other monolithic solutions, the NCP101X is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (65 − 100 − 130 kHz). When the current setpoint falls below a given value, e.g.
Published: |