NLSX4401DFT2G Datasheet - ON Semiconductor

NLSX4401DFT2G 1-Bit 20 Mb/s Dual-Supply Level Translator

VCC VL GND VCC Supply Voltage VL Supply Voltage Ground EN I/O VCC I/O VL Output Enable, Referenced to VL I/O Port, Referenced to VCC I/O Port, Referenced to VL FUNCTION TABLE EN L H Operating Mode Hi *Z I/O Buses Connected www.onsemi.com 2 NLSX4401DFT2G MAXIMUM RATINGS Symbol Param.

NLSX4401DFT2G 1-Bit 20 Mb/s Dual-Supply Level Translator The NLSX4401DFT2G is a 1 bit configurable dual supply bidirectional auto sensing translator that does not require a directional control pin. The I/O VCC and I/O VL ports are designed to track two different power supply rails, VCC and VL respectively. Both the VCC and VL supply rails are configurable from 1.65 V to 5.5 V. This allows voltage logic signals on the VL side to be translated into lower, higher or equal value vol.

NLSX4401DFT2G Features

* VL can be Less than, Greater than or Equal to VCC

* Wide VCC Operating Range: 1.65 V to 5.5 V Wide VL Operating Range: 1.65 V to 5.5 V

* High Speed with 24 Mb/s Guaranteed Date Rate

* Low Bit

* to

* Bit Skew

* Enable Input and I/O Pins are Overvo

NLSX4401DFT2G Datasheet (391.93 KB)