Datasheet4U Logo Datasheet4U.com

NCV8772C - LDO Regulator

Description

Pin No.

5 D2PAK

Positive Power Supply Input.

Connect 0.1 mF capacitor to ground.

Reset Output.

up resistor (5 V option only) connected to Vout.

Features

  • Output Voltage Options: 3.3 V and 5 V.
  • Output Voltage Accuracy: ±2%.
  • Output Current up to 350 mA.
  • Ultra Low Quiescent Current: typ 18 mA (max 24 mA).
  • Very Wide Range of Cout and ESR Values for Stability.
  • Enable Function.
  • 1 mA Max Quiescent Current when disabled.
  • Wide Input Voltage Operation Range: up to 40 V.
  • Protection Features.
  • Current Limitation.
  • Thermal Shutdown.
  • Reverse Output Curren.

📥 Download Datasheet

Datasheet Details

Part number NCV8772C
Manufacturer onsemi
File Size 527.80 KB
Description LDO Regulator
Datasheet download datasheet NCV8772C Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV8184 Tracking Regulator/Line Driver ON
NCV8501 LDO Linear Regulators ON
NCV8502 LDO Linear Regulators ON
NCV896530 Buck Converter ON Semiconducto
NCV2902 Single Supply Quad Operational Amplifiers ON

Other Datasheets by onsemi

Part Number Description
NCV8772 LDO Regulator
NCV8770 LDO Regulator
NCV8774 LDO Regulator
NCV8774C LDO Regulator
NCV8702 LDO Linear Voltage Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LDO Regulator, Ultra Low Iq, with Enable and Reset, 350 mA NCV8772C The NCV8772C is 350 mA LDO regulator with integrated reset function dedicated for microprocessor applications. Its robustness allows NCV8772C to be used in severe automotive environments. Ultra low quiescent current as low as 18 mA typical makes it suitable for applications permanently connected to battery requiring ultra low quiescent current with or without load. This feature is especially critical when modules remain in active mode when ignition is off. The Enable function can be used for further decrease of quiescent current in shutdown mode to 1 mA. The NCV8772C contains protection functions as current limit, thermal shutdown and reverse output current protection. Features • Output Voltage Options: 3.
Published: |