Datasheet4U Logo Datasheet4U.com

NCV8189 - LDO Regulator

Description

Pin No.

Pin No.

Regulated output voltage.

Features

  • Operating Input Voltage Range: 1.6 V to 5.5 V.
  • Available in Fixed Voltage Option: 0.6 V to 5.0 V.
  • Adjustable Version Reference Voltage: 0.6 V.
  • ±0.7% Initial Accuracy at 25°C.
  • ±1% Accuracy Over Load and Temperature (up to 125°C).
  • Low Quiescent Current Typ. 35 mA.
  • Shutdown Current: Typ. 0.1 mA.
  • Very Low Dropout: Typ. 65 mV at 0.5 A for 3.3 V Variant.
  • High PSRR: Typ. 85 dB at 100 mA, f = 1 kHz.
  • Low Noise: 10.

📥 Download Datasheet

Datasheet Details

Part number NCV8189
Manufacturer onsemi
File Size 490.21 KB
Description LDO Regulator
Datasheet download datasheet NCV8189 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV8184 Tracking Regulator/Line Driver ON
NCV8501 LDO Linear Regulators ON
NCV8502 LDO Linear Regulators ON
NCV896530 Buck Converter ON Semiconducto
NCV2902 Single Supply Quad Operational Amplifiers ON

Other Datasheets by onsemi

Part Number Description
NCV8186 Fast Transient Response Low Voltage 1A LDO Regulator
NCV8187 Voltage Regulator
NCV81071 Dual 5A High Speed Low-Side MOSFET Drivers
NCV8114 CMOS Low Dropout Voltage Regulator
NCV8130 Very Low Dropout Bias Rail CMOS Voltage Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET www.onsemi.com LDO Regulator, 0.5 A, High Accuracy (0.7%), Adjustable, Low Noise, High PSRR with Power Good NCV8189 The NCV8189 is a 0.5 A LDO, next generation of high PSRR, low noise and low dropout regulators with Power Good open collector output. Designed to meet the requirements of RF and sensitive analog circuits, the NCV8189 device provides low noise, high PSRR and low quiescent current while offering the ability to regulate output voltages down to 0.6 V. The device also offers excellent load / line transients. The NCV8189 is designed to work with a 4.7 mF input and output ceramic capacitor. It is available in industry standard DFNW8 0.65P, 3 mm x 3 mm and WDFNW6 0.65P, 2 mm x 2 mm. Features • Operating Input Voltage Range: 1.6 V to 5.
Published: |