Datasheet Details
| Part number | NCV7510 |
|---|---|
| Manufacturer | onsemi |
| File Size | 184.86 KB |
| Description | FlexMOS Programmable Peak and Hold PWM MOSFET Predriver |
| Datasheet |
 NCV7510 Datasheet
|
|
|
Description
PACKAGE PIN# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PIN SYMBOL ENA CONTROL PCLK CSB SCLK SI SO LOOP FAULT OCP VDD DGND SNSSNS+ PGND CLAMP SRC GATE DRN VB Logic input for Enable.
Logic input for PWM cycle control.
Logic input for clock or logic level control of Dwell timer.
Features
- are programmable via the device’s SPI port. Load current is continuously sampled and compared to the programmable 7.
- bit peak/hold DAC values while the load self.
- modulates to maintain the desired currents at each of the peak and hold points. Passive fault diagnostics monitor and protect the MOSFETs when a fault is detected. Fault data is available via SPI and an open.
- drain FAULT output provides immediate fault notification to a host controller. The FlexMOS family of produc.