Datasheet4U Logo Datasheet4U.com

NCV7344 - CAN FD Transceiver

General Description

controller area network (CAN) protocol controller and the physical bus.

The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller.

Key Features

  • make the NCV7344 an excellent choice for all types of HS.
  • CAN networks, in nodes that require a low.
  • power mode with wake.
  • up capability via the CAN bus. Features.
  • Compatible with ISO 11898.
  • 2:2016.
  • Specification for Loop Delay Symmetry up to 5 Mbps.
  • VIO pin on NCV7344.
  • 3 Version Allowing Direct Interfacing with 3 V to 5 V Microcontrollers.
  • Very Low Current Standby Mode with Wake.
  • up via the Bus.
  • Low Electroma.

📥 Download Datasheet

Datasheet Details

Part number NCV7344
Manufacturer onsemi
File Size 395.64 KB
Description CAN FD Transceiver
Datasheet download datasheet NCV7344 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV7383 Transceiver ON Semiconducto
NCV70628 Micro-stepping Motor Driver onsemi
NCV7410 Automotive Ethernet Transceiver onsemi
NCV7424 Four Channel LIN Transceiver ON Semiconducto
NCV7518 Hex Low side MOSFET Pre driver ON Semiconducto

Other Datasheets by onsemi

Part Number Description
NCV7340 High Speed Low Power CAN Transceiver
NCV7341 High Speed Low Power CAN Transceiver
NCV7342 High Speed Low Power CAN Transceiver
NCV7343 CAN FD Transceiver
NCV7349 High Speed Low Power CAN Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET www.onsemi.com High Speed Low Power CAN, CAN FD Transceiver NCV7344 Description The NCV7344 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller. The NCV7344 is an addition to the CAN high−speed transceiver family complementing NCV734x CAN stand−alone transceivers and previous generations such as AMIS42665, AMIS3066x, etc. The NCV7344 guarantees additional timing parameters to ensure robust communication at data rates beyond 1 Mbps to cope with CAN flexible data rate requirements (CAN FD).