NCV6356 Datasheet | onsemi

Description The NCV6356 is a synchronous AOT (Adaptive On- time) buck converter optimized to supply the different sub systems of automotive applications post regulation system up to 5 V input. The device is able to deliver up to 5.0 A, with programmable output voltage from 0.6 V to 1.4 V. Operation at up to 2.4 MHz switching frequency allows the use of small ponents. Synchronous rectification and automatic PFM Pseudo- PWM (PPWM) transitions improve overall solution efficiency. The NCV6356 is in low profile 3.0 x 4.0 mm DFN- 14 package. Features - Input Voltage Range from 2.5 V to 5.5 V : Battery, 3.3 V and 5.0 V Rail Powered Applications - Power Capability : 3.0 A Ta = 105°C - 5.0 A Ta = 85°C - Programmable Output Voltage : 0.6 V to 1.4 V in 6.25 m V Steps - Up to 2.4 MHz Switching Frequency with On Chip Oscillator - Uses 330 n H Inductor and at least 22 m F Capacitors for Optimized Footprint and Solution Thickness - PFM/PPWM Operation for Optimum Efficiency - Low 60 m A Quiescent Current - I2C Control Interface with Interrupt and Dynamic Voltage Scaling Support - Enable / VSEL Pins, Power Good / Interrupt Signaling - Thermal Protections and Temperature Management - Transient Load Helper: Share the Same Rail with Another Rail - 3.0 x 4.0 mm / 0.5 mm Pitch DFN 14 Package - AEC- Q100 Qualified and PPAP Capable Typical Applications - Snap Dragon - Automotive POL - Instrumentation, Clusters - Infotainment - ADAS System (Vision, Radar) .onsemi. WDFNW14 4x3, 0.5P CASE 511CM MARKING DIAGRAM 6356 xx AYWW 6356 xx A Y WW G = Specific Device Code = C: 1.150 V / 1.150 V = B: 1.200 V / 1.200 V = Q: 0.875 V / 0.906 V = Assembly Location = Year = Work Week = Pb- Free Package- (Note: Microdot may be in either location) © Semiconductor ponents Industries, LLC, 2017 August,...