Datasheet4U Logo Datasheet4U.com

NCV5702 - High Current IGBT Gate Driver

Description

Pin Name No.

needs to be turned off independent of the Microcontroller input.

up resistor of 1 MW.

Features

  • include Active Miller Clamp, accurate UVLO, EN input, DESAT protection and Active open.
  • drain FAULT output. The driver also features an accurate 5.0 V output and separate high and low (VOH and VOL) driver outputs for system design convenience. The driver is designed to accommodate a wide voltage range of bias supplies including unipolar and bipolar voltages. It is available in a 16.
  • pin SOIC package. Features.
  • High Current Output (+4/.
  • 6 A) at IGBT Miller Plateau Voltag.

📥 Download Datasheet

Datasheet Details

Part number NCV5702
Manufacturer onsemi
File Size 570.48 KB
Description High Current IGBT Gate Driver
Datasheet download datasheet NCV5702 Datasheet

📁 Similar Datasheet

  • NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
  • NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
  • NCV551 - Low-Dropout Voltage Regulator (ON)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
  • NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
  • NCV70628 - Micro-stepping Motor Driver (onsemi)
  • NCV7383 - Transceiver (ON Semiconducto)
  • NCV7410 - Automotive Ethernet Transceiver (onsemi)
  • NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
DATA SHEET www.onsemi.com High Current IGBT Gate Driver MARKING DIAGRAM NCV5702 The NCV5702 is a high−current, high−performance stand−alone IGBT driver for high power applications that include solar inverters, motor control and uninterruptible power supplies. The device offers a cost−effective solution by eliminating many external components. Device protection features include Active Miller Clamp, accurate UVLO, EN input, DESAT protection and Active open−drain FAULT output. The driver also features an accurate 5.0 V output and separate high and low (VOH and VOL) driver outputs for system design convenience. The driver is designed to accommodate a wide voltage range of bias supplies including unipolar and bipolar voltages. It is available in a 16−pin SOIC package.
Published: |