Datasheet4U Logo Datasheet4U.com

NCV53480 - Low-Power OOK/FSK/ASK ISM Band Transceiver

Description

designed for operation in the ISM band from 260 MHz to 470 MHz.

range of 1 kbps to 60 kbps.

IF, and MARKIN

Features

  • Single Supply Operation from 2.2 V to 3.63 V.
  • Temperature Range:.
  • 40°C to +125°C G = Pb.
  • Free Package CCCCC = Country of Origin.
  • (.
  • Not required if assembled in USA).
  • Simultaneous OOK/FSK (De)modulation.
  • No External Switch Needed Between LNA Input and PA Output.

📥 Download Datasheet

Datasheet Details

Part number NCV53480
Manufacturer onsemi
File Size 541.66 KB
Description Low-Power OOK/FSK/ASK ISM Band Transceiver
Datasheet download datasheet NCV53480 Datasheet

📁 Similar Datasheet

  • NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
  • NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
  • NCV551 - Low-Dropout Voltage Regulator (ON)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
  • NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
  • NCV70628 - Micro-stepping Motor Driver (onsemi)
  • NCV7383 - Transceiver (ON Semiconducto)
  • NCV7410 - Automotive Ethernet Transceiver (onsemi)
  • NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)
Other Datasheets by ON Semiconductor
  • NCV500 - 150mA CMOS Low Noise Low-Dropout Voltage Regulator
  • NCV502 - Voltage Regulator
  • NCV5104 - Half Bridge Driver
  • NCV5106A - 600V Automotive High and Low Side Driver
  • NCV5106B - 600V Automotive High and Low Side Driver
  • NCV511 - Low-Dropout Voltage Regulator
  • NCV51152 - Single Channel Gate Driver
  • NCV51190 - 1.5A DDR Memory Termination Regulator

Full PDF Text Transcription

Click to expand full text
NCV53480 Low-Power OOK/FSK/ASK ISM Band Transceiver General Description The NCV53480 ASSP is a low power OOK/FSK/ASK transceiver designed for operation in the ISM band from 260 MHz to 470 MHz. It http://onsemi.com is intended for use in narrowband, low data rate applications in the range of 1 kbps to 60 kbps. The receiver architecture is low−IF, and MARKING contains image reject filtering to provide 40 dB of image reject. The IF DIAGRAM filter is fully integrated on chip with selectable bandwidth settings of 100 kHz, 200 kHz, and 300 kHz. The transmitter output power is programmable from −20 to 10 dBm.
Published: |