Datasheet4U Logo Datasheet4U.com

NCV1060 - Automotive High-Voltage Switcher

General Description

Pin No SOIC 10 SOIC 16 Pin Name Function 1 1 4 GND The IC Ground 2 5 VCC Powers the Internal Circuitry 3 6 LIM/OPP Ipeak Set / Over Power Limitation 4 7 FB Feedback Signal Input 5 8 Comp Compensation 6 10 9 12 13 16 Drain Drain Connection

Key Features

  • include: a timer to detect an overload or a short.
  • circuit event, Overvoltage Protection with auto.
  • recovery and AC input line voltage detection (A version). The ON proprietary integrated Over Power Protection (OPP) lets you harness the maximum delivered power without affecting your standby performance simply via external resistors. For improved standby performance, the connection of an auxiliary winding stops the DSS operation and helps to reduce input power consumption below 50 m.

📥 Download Datasheet

Datasheet Details

Part number NCV1060
Manufacturer onsemi
File Size 569.76 KB
Description Automotive High-Voltage Switcher
Datasheet download datasheet NCV1060 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV2902 Single Supply Quad Operational Amplifiers ON
NCV3025833 Smart Power Stage onsemi
NCV4279 5.0V Micropower 150mA LDO Linear Regulator ON
NCV51153 4.5-A/9-A Isolated Single Channel Gate Driver onsemi
NCV51563 4.5-A/9-A Isolated Dual Channel Gate Driver onsemi

Other Datasheets by onsemi

Part Number Description
NCV1063 Automotive High-Voltage Switcher
NCV1009 2.5 Volt Reference
NCV1034 100V Synchronous PWM Buck Controller
NCV1072 Automotive High-Voltage Switcher
NCV1075 Automotive High-Voltage Switcher

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Automotive High-Voltage Switcher for Low Power Offline SMPS NCV1060, NCV1063 The NCV106X products integrate a fixed frequency current mode controller with a 670 V MOSFET. Available in a SOIC−10 or SOIC−16 package, the NCV106X offer a high level of integration, including soft−start, frequency−jittering, short−circuit protection, skip−cycle, adjustable peak current set point, ramp compensation, and a Dynamic Self−Supply (eliminating the need for an auxiliary winding). Unlike other monolithic solutions, the NCV106X is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (60 kHz or 100 kHz). When the output power demand diminishes, the IC automatically enters frequency foldback mode and provides excellent efficiency at light loads.