Datasheet4U Logo Datasheet4U.com

NCS5650 - 2 Amp PLC Line Driver

Description

Pin# Symbol Pin Function 1 Enable Enable/ Shutdown Input (Low = Enable) 2 Vcom Virtual Common at (VCC

VEE)/2; not to be used as a reference.

Negative ( ) Input of Op Amp A 5 Amp A Out Output o

Features

  • Rail.
  • to.
  • Rail Drop of Only $1 V with Iout = 1.5 A.
  • VCC: Single.
  • Sided (6 V to 12 V) or Dual.
  • Balanced $6.0 V.
  • Flexible 4th.
  • Order Filtering.
  • Current.
  • Limit Set with One Resistor.
  • Diagnostic Flags Level Shifted to V_mc to Simplify Interface with External MCU.
  • Thermal Warning Flag with Flexible Threshold Setting.
  • Thermal Error flag and Shutdown.
  • Overcurrent Flag.
  • Enable/Shut.

📥 Download Datasheet

Datasheet Details

Part number NCS5650
Manufacturer onsemi
File Size 160.73 KB
Description 2 Amp PLC Line Driver
Datasheet download datasheet NCS5650 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCS12D1205C DC/DC Converters Murata
NCS12D1212C DC/DC Converters Murata
NCS12D1215C DC/DC Converters Murata
NCS12D4805C DC/DC Converters Murata
NCS12D4812C DC/DC Converters Murata

Other Datasheets by onsemi

Part Number Description
NCS5651 2 Amp PLC Line Driver
NCS5652 Dual Power Operational Amplifier
NCS1002 Constant Voltage/Constant Current Secondary-Side Controller
NCS1002A Constant Voltage/Constant Current Secondary-Side Controller
NCS12802 12-Channel I2C Programmable Gamma Voltage Reference Generator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCS5650 2 Amp PLC Line Driver The NCS5650 is a high efficiency, Class A/B, low distortion power line driver. Its design is optimized to accept a signal from a Power Line Carrier modem. The output stage is designed to drive up to 2 A peak into an isolation transformer or simple coil coupling to the mains. At output current of 1.5 A, the output voltage is guaranteed to swing within 1 V or less of either rail giving the user improved SNR. Power supply options are single−sided 6 V to 12 V and dual balanced $3.0 V to $6.0 V. The input stage contains an operational amplifier which can be configured as a unity gain follower buffer or used to provide the first stage of a 4−pole low pass filter.
Published: |