Datasheet4U Logo Datasheet4U.com

NCS37015 - Self Test Ground Fault-Circuit Interrupter

Description

Pin # Name Pad Description 1 CTG Ground Neutral current transformer stimulus 2 GFT Differential self test output signal 3 CTB Differential current transformer bias voltage 4 CTS Differential current input 5 CTO Differential current to voltage output 6 IDF Differential low pass f

Features

  • Meets UL943 Self.
  • test GFCI Requirements.
  • 4.0.
  • 12 Volt Operation (120.
  • 480 V AC mains with the appropriate series impedance).
  • 40°C to 95°C.
  • Typical 575 mA Quiescent Current @ 11 V.
  • 16 Pin QFN.
  • Inverted and Latched SCR Output to Facilitate a Solenoid Operation.
  • Self Syncing Internal Oscillator adjusts to AC Mains Frequency to Guarantee Full Resolution on 60 Hz Distribution Systems.
  • Optimized S.

📥 Download Datasheet

Datasheet Details

Part number NCS37015
Manufacturer onsemi
File Size 208.37 KB
Description Self Test Ground Fault-Circuit Interrupter
Datasheet download datasheet NCS37015 Datasheet

📁 Similar Datasheet

  • NCS37021 - Self-Test Ground Fault Circuit Interrupter (onsemi)
  • NCS3S1203SC - Isolated 3W 4:1 Input Single Output DC-DC Converters (muRata)
  • NCS3S1205SC - Isolated 3W 4:1 Input Single Output DC-DC Converters (muRata)
  • NCS3S1212SC - Isolated 3W 4:1 Input Single Output DC-DC Converters (muRata)
  • NCS3S1215SC - Isolated 3W 4:1 Input Single Output DC-DC Converters (muRata)
  • NCS3S4803SC - Isolated 3W 4:1 Input Single Output DC-DC Converters (muRata)
  • NCS3S4805SC - Isolated 3W 4:1 Input Single Output DC-DC Converters (muRata)
  • NCS3S4812SC - Isolated 3W 4:1 Input Single Output DC-DC Converters (muRata)
  • NCS3S4815SC - Isolated 3W 4:1 Input Single Output DC-DC Converters (muRata)
  • NCS12D1205C - DC/DC Converters (Murata)
Other Datasheets by ON Semiconductor
  • NCS37010 - Self Test With Lockout Ground Fault-Circuit Interrupter
  • NCS37012 - Self Test Ground Fault-Circuit Interrupter
  • NCS37014 - Self Test Ground Fault-Circuit Interrupter
  • NCS37000 - Ground Fault Circuit Interrupter
  • NCS37005 - Ground Fault Interrupter
  • NCS37020 - Self-Test Appliance Leakage Circuit Interrupter
  • NCS32100 - Inductive Position Sensor
  • NCS325 - Zero-Drift Operational Amplifier

Full PDF Text Transcription

Click to expand full text
Self Test Ground Fault Circuit Interrupter (GFCI) NCS37015 The NCS37015 is a UL943 compliant signal processor for GFCI applications with self test. The device integrates a flexible power supply (including a 12 V shunt and two 3.3 V internal series regulators), differential fault, and grounded−neutral detection circuits. Self test is monitored at start up and then every 17 minutes. Features • Meets UL943 Self−test GFCI Requirements • 4.
Published: |