Datasheet4U Logo Datasheet4U.com

NCS36000 Datasheet Passive Infrared (PIR) Detector Controller

Manufacturer: onsemi

📥 Download Datasheet

Datasheet Details

Part number NCS36000
Manufacturer onsemi
File Size 263.01 KB
Description Passive Infrared (PIR) Detector Controller
Datasheet download datasheet NCS36000 Datasheet

General Description

Pin No.

Pin Name 1 OP2_O 2 OP2_N 3 OP1_O 4 OP1_N 5 OP1_P 6 VREF 7 VSS 8 OUT 9 LED 10 xLED_EN 11 NC 12 MODE 13 O

Overview

Passive Infrared (PIR) Detector Controller NCS36000 The NCS36000 is a fully integrated mixed−signal CMOS device designed for low−cost passive infrared controlling applications.

The device integrates two low−noise amplifiers and a LDO regulator to drive the sensor.

The output of the amplifiers goes to a window comparator that uses internal voltage references from the regulator.

Key Features

  • 3.0.
  • 5.75 V Operation.
  • 40 to 85°C.
  • 14 Pin SOIC Package.
  • Integrated 2.
  • Stage Amplifier.
  • Internal LDO to Drive Sensor.
  • Internal Oscillator with External RC.
  • Single or Dual Pulse Detection.
  • Direct Drive of LED and OUT.
  • This is a Pb.
  • Free Device Typical.

More Datasheets from onsemi

Part Number Description
NCS36510 Low Power System-on-Chip
NCS32100 Inductive Position Sensor
NCS325 Zero-Drift Operational Amplifier
NCS333 Zero-Drift Operational Amplifier
NCS333A Zero-Drift Operational Amplifier
NCS3402 Dual Nano-power Open Drain Output Comparator
NCS37000 Ground Fault Circuit Interrupter
NCS37005 Ground Fault Interrupter
NCS37010 Self Test With Lockout Ground Fault-Circuit Interrupter
NCS37012 Self Test Ground Fault-Circuit Interrupter