Datasheet4U Logo Datasheet4U.com

NCP5369 - Integrated Driver MOSFET

Description

Pin No.

Features

  • Capable of Switching Frequencies Up to 1 MHz.
  • Capable of Output Currents Up to 35 A.
  • Internal Bootstrap Diode.
  • Zero Current Detection.
  • Undervoltage Lockout.
  • Internal Thermal Warning / Thermal Shutdown.
  • These are Pb.
  • Free Devices 5 V 12.
  • 20 V 5V ZCD Enable Output Disable PWM Thermal Warning THWN VIN VCIN BOOT ZCD_EN# DISB# PWM CGND PHASE VSWH PGND Vout Figure 1.

📥 Download Datasheet

Datasheet Details

Part number NCP5369
Manufacturer onsemi
File Size 70.39 KB
Description Integrated Driver MOSFET
Datasheet download datasheet NCP5369 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP500 150mA CMOS Low Noise Low-Dropout Voltage Regulator ON
NCP5007 Compact Backlight LED Boost Driver ON
NCP511 Low-Dropout Voltage Regulator ON
NCP51752 4.5-A/9-A Isolated Single Channel Gate Driver onsemi
NCP5203 2-in-1 DDR Power Controller ON

Other Datasheets by onsemi

Part Number Description
NCP5369N Integrated Driver MOSFET
NCP5304 High and Low Side Driver
NCP5306 Three-Phase VRM 9.0 Buck Controller
NCP5314 Two/Three/Four-Phase Buck CPU Controller
NCP5316 Four/Five/Six-Phase Buck CPU Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCP5369 Integrated Driver and MOSFET The NCP5369 integrates a MOSFET driver, high−side MOSFET and low−side MOSFET into a 6 mm x 6 mm 40−pin QFN package. The driver and MOSFETs have been optimized for high−current DC−DC buck power conversion applications. The NCP5369 integrated solution greatly reduces package parasitics and board space compared to a discrete component solution. Features • Capable of Switching Frequencies Up to 1 MHz • Capable of Output Currents Up to 35 A • Internal Bootstrap Diode • Zero Current Detection • Undervoltage Lockout • Internal Thermal Warning / Thermal Shutdown • These are Pb−Free Devices 5 V 12−20 V 5V ZCD Enable Output Disable PWM Thermal Warning THWN VIN VCIN BOOT ZCD_EN# DISB# PWM CGND PHASE VSWH PGND Vout Figure 1. Application Schematic www.