* Very Low Noise at 39 mVrms without a Bypass Capacitor
* High Ripple Rejection of 70 dB at 1 kHz
* Low Dropout Voltage of 140 mV (typ) at 30 mA
* Tight L.

* RF Subsystems in Handsets
* Noise Sensitive Circuits; VCOs, PLL Battery or Unregulated Voltage C1 1m 1 2 5.

Pin No. Pin Name Description 1 Vin Positive power supply input voltage 2 GND Power supply ground 3 Enable This input is used to place the device into low−power stand by. When this input is pulled low, the device is disabled. If this functi.

Since 2006. D4U Semicon.   |   Contact Us   |   Privacy Policy   |   Purchase of parts