NCP330 switch equivalent, soft-start controlled load switch.
* 1.8 V − 5.5 V Operating Range
* 30 mW N−MOSFET
* DC Current Up to 3 A
* Peak Current Up to 5 A
* Built−in Soft−Start 2 ms
* Reverse Voltage Prot.
The very low RDS(on) allows system supplying or battery charging up to DC 3A.The device is enable automatically if a Po.
Pin Name
Pin Number
Type
IN 1 POWER
GND EN OUT
2 POWER 3 INPUT 4 OUTPUT
PAD1
POWER
Description
Power−switch input voltage; connect a 1 mF or greater ceramic capacitor from IN to GND as close as possible to the IC.
Ground connection;
Enable i.
Image gallery
TAGS
Download (Size : 205.39KB)