Datasheet4U Logo Datasheet4U.com

NCP176 - Fast Transient Response Low Voltage 500mA LDO Regulator

General Description

Pin No.

Not internally connected.

This pin can be tied to the ground plane to improve thermal dissipation.

Key Features

  • Operating Input Voltage Range: 1.4 V to 5.5 V.
  • Output Voltage Range: 0.7 to 3.6 V (0.1 V steps).
  • Quiescent Current typ. 60 mA.
  • Low Dropout: 130 mV typ. at 500 mA, VOUT = 2.5 V.
  • High Output Voltage Accuracy ±0.8% (VOUT > 1.8 V).
  • Stable with Small 1 mF Ceramic Capacitors.
  • Over.
  • current Protection.
  • Built.
  • in Soft Start Circuit to Suppress Inrush Current.
  • Thermal Shutdown Protection: 165°C.
  • With.

📥 Download Datasheet

Datasheet Details

Part number NCP176
Manufacturer onsemi
File Size 476.17 KB
Description Fast Transient Response Low Voltage 500mA LDO Regulator
Datasheet download datasheet NCP176 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP1729 Switched Capacitor Voltage Inverter ON
NCP1030 Integrated DC-DC Converter ON
NCP1031 Integrated DC-DC Converter ON
NCP1086 1.5A Adjustable and 3.3V Fixed Output Linear Regulator ON
NCP1212 Current Mode PWM Controller ON

Other Datasheets by onsemi

Part Number Description
NCP170 150mA CMOS LDO Regulator
NCP171 LDO Regulator
NCP177 Low Voltage Regulator
NCP100 Sub 1.0V Precision Adjustable Shunt Regulator
NCP1000 Integrated Off-Line Switching Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LDO Regulator - Fast Transient Response, Low Voltage 500 mA NCP176 The NCP176 is CMOS LDO regulator featuring 500 mA output current. The input voltage is as low as 1.4 V and the output voltage can be set from 0.7 V. Features • Operating Input Voltage Range: 1.4 V to 5.5 V • Output Voltage Range: 0.7 to 3.6 V (0.1 V steps) • Quiescent Current typ. 60 mA • Low Dropout: 130 mV typ. at 500 mA, VOUT = 2.5 V • High Output Voltage Accuracy ±0.8% (VOUT > 1.8 V) • Stable with Small 1 mF Ceramic Capacitors • Over−current Protection • Built−in Soft Start Circuit to Suppress Inrush Current • Thermal Shutdown Protection: 165°C • With (NCP176A) and Without (NCP176B) Output Discharge Function • Available in XDFN6 1.2 mm x 1.2 mm x 0.