NCP164 - LDO Regulator

ON Semiconductor

NCP164 Datasheet Preview — Preview of NCP164 PDF

Datasheet Details

Part number	NCP164
Manufacturer	ON Semiconductor ↗
File Size	488.70 KB
Description	LDO Regulator
Datasheet	NCP164-ONSemiconductor.pdf

NCP164 Product details

Description

Pin No. 5 Pin No.WDFN6 Pin Name Description 1 6 IN Input voltage supply pin 5 1 OUT Regulated output voltage.The output should be bypassed with small 1 mF ceramic capacitor 3 4 EN Chip enable: Applying VEN < 0.2 V disables the regulator, Pulling VEN > 0.7 V enables the LDO 4/ 3 PG Power Good, open collector.Use 10 kW to 100 kW pull up resistor connected to output or input voltage 2 5 GND Common ground connection /4 2 ADJ Adjust

Features

Operating Input Voltage Range: 1.6 V to 5.5 V.
Available in Fixed Voltage Option: 1.2 V to 5 V.
Adjustable Version Reference Voltage: 1.1 V.
2% Accuracy Over Load and Temperature.
Ultra Low Quiescent Current Typ. 30 mA.
Standby Current: Typ. 0.1 mA.
Very Low Dropout: 110 mV at 300 mA for 3.3 V Variant.
Ultra High PSRR: Typ. 85 dB at 10 mA, f = 1 kHz.
Ultra Low Noise: 9 mVRMS (Fixed Version).
Stable with a 1 mF Small Case Size Ceramic Capacitors.

📁 NCP164 Similar Datasheet

NCP1651 - Single Stage Power Factor Controller (ON)
NCP1030 - Integrated DC-DC Converter (ON)
NCP1031 - Integrated DC-DC Converter (ON)
NCP1086 - 1.5A Adjustable and 3.3V Fixed Output Linear Regulator (ON)
NCP1212 - Current Mode PWM Controller (ON)
NCP1215 - Low Cost Variable OFF Time Switched Mode Power Supply Controller (ON)
NCP1216 - PWM Current-Mode Controller (ON)
NCP1225 - Low Standby Power SMPS Controller (ON)

Other Datasheets by ON Semiconductor

NCP164C - LDO Regulator
NCP160 - Ultra-Low Noise and High PSRR LDO Regulator
NCP1600 - High Voltage PFC Controller
NCP1601A - Power Factor Correction Controller
NCP1601B - Power Factor Correction Controller
NCP1602 - High-Efficiency Power Factor Controller

Published: Sep 1, 2023 |