Datasheet4U Logo Datasheet4U.com

NCP1581 - High Frequency Synchronous Step-Down PWM Controller

Description

Table 1.

Inverting input to the error amplifier.

to set the output voltage and provide feedback to the error amplifier.

Features

  • a programmable soft start set by an external capacitor, under.
  • voltage lockout and output under.
  • voltage detection that latches off the device when an output short is detected. Features.
  • Power up Sequencing / Tracking.
  • Enable Input.
  • Internal 400 kHz Oscillator.
  • Programmable Soft.
  • Start.
  • Fixed Frequency Voltage Mode.
  • Voltage Mode Adaptive Deadtime.
  • This is a Pb.
  • Free Device.

📥 Download Datasheet

Datasheet Details

Part number NCP1581
Manufacturer onsemi
File Size 400.93 KB
Description High Frequency Synchronous Step-Down PWM Controller
Datasheet download datasheet NCP1581 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP1500 Dual Mode PWM/Linear BUCK Converter ON
NCP1530 600mA PWM/PFM Step-Down Converter ON
NCP1550 600 kHz PWM/PFM Step-Down DC-DC Controller ON
NCP1560 Full Featured Voltage Mode PWM Controller ON
NCP15WB333E03RC Thermistors Murata

Other Datasheets by onsemi

Part Number Description
NCP1580 Low Voltage Synchronous Buck Controller
NCP1582 Low Voltage Synchronous Buck Controller
NCP1582A Low Voltage Synchronous Buck Controller
NCP1583 Low Voltage Synchronous Buck Controller
NCP1586 Low Voltage Synchronous Buck Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCP1581 High Frequency Synchronous Step Down PWM Controller for Tracking Applications The NCP1581 controller IC is designed to provide a simple synchronous buck regulator for on−board DC to DC applications in a 14−pin SOIC. The NCP1581 is designed specifically for tracking applications by providing the track input. The NCP1581 operates at a fixed internal 400 kHz switching frequency allowing the use of small external components. The device features a programmable soft start set by an external capacitor, under−voltage lockout and output under−voltage detection that latches off the device when an output short is detected.