NCL30000

The NCL30000 is Power Factor Corrected Dimmable LED Driver designed by ON Semiconductor.

Product Overview

ON Semiconductor

Datasheet Details

Part number	NCL30000
Manufacturer	ON Semiconductor
File Size	269.13 KB
Description	Power Factor Corrected Dimmable LED Driver
Datasheet	NCL30000_ONSemiconductor.pdf
Additional preview pages of the NCL30000 datasheet.

Product details

Description

Pin Name Function 1 MFP The multi-function pin is connected to the internal error amplifier.By pulling this pin below the Vuvp threshold, the controller is disabled.In addition, this pin also has an over voltage comparator which will disable the controller in the event of a fault.2 COMP The COMP pin is the output of the internal error amplifier.A compensation network is connected between this pin and ground to set the loop bandwidth.Normally this bandwidth is set at a low frequency (typ

Features

a programmable on time limiter, zero current detect sense block, gate driver, trans-conductance error amplifier as well as all PWM control circuitry and protection functions required to implement a CrM switch mode power supply. Moreover, for high efficiency, the device features low startup current enabling fast, low loss charging of the VCC capacitor. The current sense protection threshold has been set at 500 mV to minimize power dissipation in the external sense resistor. To support the environ.

📁 Similar Datasheet

NCL020 - Crystal Clock Oscillator (SaRonix)
NCL030 - Crystal Clock Oscillator (SaRonix)
NCLD3B1256M32 - 8Gb LPDDR3 SDRAM (FORESEE)
NCLD3B2512M32 - 16Gb LPDDR3 SDRAM (FORESEE)

Other Datasheets by ON Semiconductor

NCL30001 - High-Efficiency Single Stage Power Factor Correction and Step-Down Offline LED Driver
NCL30030 - Combination Power Factor Correction and Quasi-Resonant Flyback Controllers
NCL30051 - PFC and Half-Bridge Resonant Combo Controller
NCL30060 - High PF Offline Single Stage LED Driver
NCL30073 - Current-Mode PWM Controller
NCL30076 - Quasi-Resonant Buck Controller

Published: Feb 7, 2010 |