NC7SZ18 Overview
Key Specifications
Package: TSSOP
Mount Type: Surface Mount
Pins: 6
Operating Voltage: 1.8 V
Description
The NC7SZ18 is a 1-of-2 non-inverting demultiplexer. The device will buffer the data on the A pin and pass to either output Y0 or Y1 dependent on whether state of the select pin (S) is LOW or HIGH respectively.
Key Features
- Ultra High-Speed: tPD = 2.5 ns Typical at 5 V VCC
- High Impedance Output when Deselected
- Broad VCC Operating Range: 1.65 V to 5.50 V
- Power Down High Impednce Inputs / Outputs
- Over-Voltage Tolerance Inputs Facilitate 5 V to 3 V Translation
- Proprietary Noise / EMI Reduction Circuitry
- Ultra-Small MicroPak⢠Packages
