Datasheet4U Logo Datasheet4U.com

MM74HCT04 - Hex Inverter

Description

The MM74HCT04 is a logic function fabricated by using advanced silicon gate CMOS technology which provides the inherent benefits of CMOS

low quiescent power and wide power supply range.

out compatible with standard

Features

  • low power dissipation and fast switching times. All inputs are protected from static discharge by internal diodes to VCC and ground. MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug.
  • in replacements for LS.
  • TTL devices and can be used to reduce power consumption in existing designs. Features.
  • TTL, LS Pin.
  • out and Threshold Compatible.
  • Fast Switching: tPLH, tPHL = 10 ns (typ. ).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MM74HCT04 Hex Inverter Fairchild
MM74HCT00 Quad 2 Input NAND Gate Fairchild
MM74HCT05 Hex Inverter (Open Drain) Fairchild
MM74HCT05 Hex Inverter National Semiconductor
MM74HCT08 Quad 2-Input AND Gate Fairchild

Other Datasheets by onsemi

Part Number Description
MM74HCT32 Quad 2-Input OR Gate
MM74HCT540 Inverting/Non-Inverting Octal 3-State Buffer
MM74HCT541 Inverting/Non-Inverting Octal 3-State Buffer
MM74HC00 Quad 2-Input NAND Gate
MM74HC02 Quad 2-Input NOR Gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Hex Inverter MM74HCT04 General Description The MM74HCT04 is a logic function fabricated by using advanced silicon−gate CMOS technology which provides the inherent benefits of CMOS—low quiescent power and wide power supply range. This device is input and output characteristic as well as pin−out compatible with standard 74LS logic families. The MM74HCT04, triple buffered, hex inverters, features low power dissipation and fast switching times. All inputs are protected from static discharge by internal diodes to VCC and ground. MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug−in replacements for LS−TTL devices and can be used to reduce power consumption in existing designs.
Published: |